{"product_id":"adafruit-neopixel-digital-rgbw-led-strip-1m-black-pcb-60-ledm-discontinued","title":"Adafruit NeoPixel Digital RGBW LED Strip - 1m Black PCB 60 LED\/m [Discontinued]","description":"\u003cp\u003eWhat is better than smart RGB LEDs? Smart RGB+White LEDs! These NeoPixels now have 4 LEDs in them (red, green, blue \u003cem\u003eand\u003c\/em\u003e white) for excellent lighting effects. These LED strips are fun and glowy, and you can control each LED individually!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis is the 60 LED\/m RGBW strip with a clear casing and Black Flex PCB!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe NeoPixel is 'split', one half is the RGB you know and love, the other half is a white LED with a yellow phosphor. Unlit, it resembles an egg yolk. Lit up these are insanely bright (like ow my eye hurts) and can be controlled with 8-bit PWM per channel (8 x 4 channels = 32-bit color overall). Great for adding lots of colorful + white dots to your project!\u003c\/p\u003e\n\u003cp\u003eNeoPixel LEDs use 800 KHz protocol so specific timing is required. On NeoPixels, the PWM rate is 400 Hz, which works well but is noticable if the LED is moving. In comparison, DotStars have a 20 KHz PWM rate, so even when moving the LED around, you won't see the pixelation, the blending is very smooth. (we recommend DotStars if you can use them) \u003c\/p\u003e\n\u003cp\u003eNeoPixels are 5050-sized LEDs with an embedded microcontroller \u003cstrong\u003einside the LED\u003c\/strong\u003e. You can set the brightness and color of each R\/G\/B\/W with 8-bit PWM precision (so 32-bit color per pixel). The LEDs are controlled by shift-registers that are chained up down the strip so you can shorten or lengthen the strip. Only 1 digital output pin are required to send data down. The PWM is built into each LED-chip so once you set the color you can stop talking to the strip and it will continue to PWM all the LEDs for you.\u003c\/p\u003e\n\u003cp\u003eThe strip is made of flexible PCB material, and comes with a weatherproof sheathing. You can cut this stuff pretty easily with wire cutters, there are cut-lines every 0.65\"\/1.7cm (1 LED each). Solder to the 0.1\" copper pads and you're good to go. Of course, you can also connect strips together to make them longer, just watch how much current you need! We have a 5V\/2A supply that should be able to drive 1 meter (depending on use) and a 5V\/10A supply that can drive up to 4 meters (depending on use) \u003cstrong\u003eYou must use a 5V DC power supply to power these strips, do not use higher than 6V or you can destroy the entire strip.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWe have a tutorial showing wiring, power usage calculations, example code for usage, etc. for NeoPixel Please check it out!\u003c\/strong\u003e\u003cstrong\u003e \u003c\/strong\u003e \u003cstrong\u003ePlease note you will need a NeoPixel library with RGBW support\u003c\/strong\u003e which is not always available. If you try to control these with a plain 'RGB' NeoPixel library, you'll get very weird results. Our Adafruit NeoPixel library does support RGBW but if you're using something else, just be aware that it might require some hacking. Also, the Blue LED element is close to the white phosphor and the light bleeds into it, so blue light will have a mix of white as well.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong data-mce-fragment=\"1\"\u003eThese strips are\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003esold in 1m strips only\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e! If you buy multiple units at a time, you'll get multiple individual 1m strips!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTo wire up these strips we suggest picking up a 2.1mm DC jack to wire in so you can connect one of our wall adapters to power it. For the data + ground pins, you can pick up 2-pin JST set to turn it into a quick connection.\u003c\/p\u003e\n\u003cp\u003eOur detailed NeoPixel Uberguide has everything you need to use NeoPixels in any shape and size. Including ready-to-go library \u0026amp; example code for the Arduino UNO\/Duemilanove\/Diecimila, Flora\/Micro\/Leonardo, Trinket\/Gemma, Arduino Due \u0026amp; Arduino Mega\/ADK (all versions)\u003c\/p\u003e\n\u003ch2\u003eTechnical Details\u003c\/h2\u003e\n\u003cdiv id=\"tab-technical-details-content\" class=\"panel-collapse collapse in\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-12 col-md-12 col-sm-12 col-xs-12\"\u003e\n\u003cul\u003e\n\u003cli\u003eSK6812RGBW Datasheet\u003c\/li\u003e\n\u003cli\u003eLEDs per meter: 60 LEDs\/m\u003c\/li\u003e\n\u003cli\u003eWidth of strip (w\/ waterproofing): ~12.6mm \/ ~0.5\"\u003c\/li\u003e\n\u003cli\u003eThickness of strip (w\/ waterproofing): ~4.2mm \/ 0.16\"\u003c\/li\u003e\n\u003cli\u003eRemovable IP65 weatherproof casing\u003c\/li\u003e\n\u003cli\u003eMaximum 5V @ 80mA draw per LED (all LEDs on full brightness)\u003c\/li\u003e\n\u003cli\u003e5VDC power requirement (do not exceed 6VDC) - no polarity protection\u003c\/li\u003e\n\u003cli\u003e1 integrated RGB LEDs per segment, individually controllable\u003c\/li\u003e\n\u003cli\u003eNeutral white color temperature: ~4000-4500K\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cul id=\"product-files\"\u003e\u003c\/ul\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":48623666626778,"sku":"ifo1789675130549","price":20.92,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0824\/8318\/3834\/files\/adafruit-neopixel-digital-rgbw-led-strip---1m-black-pcb-60-ledm-discontinued_1.jpg?v=1789675135","url":"https:\/\/memoryfoamwear.shop\/products\/adafruit-neopixel-digital-rgbw-led-strip-1m-black-pcb-60-ledm-discontinued","provider":"My Store","version":"1.0","type":"link"}