{"title":"BBC micro:bit Add-ons and Extensions","description":"\u003cp\u003eBrowse our BBC micro:bit Add-ons and Extensions collection. Free Shipping.\u003c\/p\u003e","products":[{"product_id":"edge-connector-breakout-board-for-microbit","title":"Edge Connector Breakout Board for micro:bit","description":"\u003cp\u003eThis pre-built Edge Connector Breakout Board for the micro:bit gives access to all the important pins on the bottom edge of the micro:bit.\u003c\/p\u003e\n\u003cp\u003eLooking to do more with your micro:bit? Unlock its potential with this pre-built version of our Edge Connector Breakout Board! This breakout board has been designed to offer an easy way to connect additional circuits and hardware to the pins on the edge of the micro:bit. It provides access to all of the micro:bit processor pins allowing a lot of extra functionality to be added. The datasheet (below) includes a helpful diagram explaining the function of every pin on the micro:bit.\u003c\/p\u003e\n\u003cp\u003eThis Edge Connector Breakout Board for the micro:bit gives access to all of the important pins on the bottom edge of the micro:bit. 21 pins are broken out in total; providing additional I\/O lines, direct access to buttons A and B, the LED matrix outputs and the I2C bus. Please refer to the datasheet below for more details.\u003c\/p\u003e\n\u003cp\u003eThe micro:bit pins are broken out to a row of pin headers. These provide an easy way of connecting circuits using jumper wires. The SCL and SDA pins are separated at the edge of the board (solder pads) providing easy identification. The PCB includes a prototyping area with 3V, 0V and unconnected rows that can be soldered to. This allows the easy connection of switches, sensors and any pull-up or pull-down resistors etc. as required.\u003c\/p\u003e\n\u003cp\u003eTo use the breakout board the micro:bit should be inserted firmly into the connector as shown below:\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/5601b_edge_connector_breakout_board_connecting_large.jpg?225716761978738442\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThis product is supplied with straight double row PCB pin headers already soldered to the breakout board\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFeatures a dedicated pin strip for quick and easy prototyping\u003c\/li\u003e\n\u003cli\u003eBreaks out 21 pins from the edge of the micro:bit\u003c\/li\u003e\n\u003cli\u003eDedicated prototyping area with 3V and 0V rows\u003c\/li\u003e\n\u003cli\u003eLabelled pins and clear, straightforward documentation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eContents:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Edge Connector Breakout Board for the micro:bit, pre-built\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLength: 60mm\u003c\/li\u003e\n\u003cli\u003eWidth: 40mm\u003c\/li\u003e\n\u003cli\u003eHeight: 11.8mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/bzm4zepbGAc\" frameborder=\"0\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRequires:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 x micro:bit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eResources:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Kitronik","offers":[{"title":"Default Title","offer_id":48623768830170,"sku":"wxv1789677918830","price":4.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0824\/8318\/3834\/files\/edge-connector-breakout-board-for-microbit_1.jpg?v=1789677924"},{"product_id":"prototyping-system-for-the-microbit","title":"Prototyping system for the micro:bit","description":"\u003cp\u003eThis Prototyping System for the BBC micro:bit is a great way to start making circuits and making experiments without the need to solder.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease Note: BBC micro:bit, 2 x AAA Battery Cage and 2 x AAA Batteries are NOT included. If you also require a BBC micro:bit, you can order one .\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis prototyping system uses our specially designed that gives full access to the pins on the bottom of the micro:bit. The micro:bit pins are broken out to a row of pin headers, the SCL and SDA pins are separated at the edge of the board providing easy identification. The PCB includes a prototyping area with 3V, 0V and unconnected rows that can be soldered to. This allows easy connection of switches, sensors and any pull-up or pull-down resistors etc. as required.\u003c\/p\u003e\n\u003cp\u003eThis prototyping system is used in conjunction with a . This makes it easy to connect additional components using the included . No soldering required.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/5603_inventors_kit_for_the_bbc_microbit_description_large.jpg?v=1520418767\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis kit requires assembly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNo soldering is required\u003c\/li\u003e\n\u003cli\u003eBreaks out 21 pins from the micro:bit using the\n\u003c\/li\u003e\n\u003cli\u003eSmall prototype breadboard included so you can use additional components\u003c\/li\u003e\n\u003cli\u003eRun your own custom code from your micro:bit to interact with external components\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eContents:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2 x pan head M3 machine screws\u003c\/li\u003e\n\u003cli\u003e1 x small prototype breadboard\u003c\/li\u003e\n\u003cli\u003e10 x jumper wires male to male\u003c\/li\u003e\n\u003cli\u003e10 x jumper wires male to female\u003c\/li\u003e\n\u003cli\u003e1 x Perspex mounting plate\u003c\/li\u003e\n\u003cli\u003e1 x\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRequires:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 x\n\u003c\/li\u003e\n\u003cli\u003e1 x Phillips screwdriver\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eResources:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/JCkoCDFdFtM\" frameborder=\"0\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"Kitronik","offers":[{"title":"Default Title","offer_id":48623789998298,"sku":"jbr1789678633468","price":14.02,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0824\/8318\/3834\/files\/prototyping-system-for-the-microbit_1.jpg?v=1789678637"},{"product_id":"automationbit","title":"automation:bit","description":"\u003cp\u003eControl and monitor your world with automation:bit! It's tolerant of up to 24V, with analog and digital inputs, outputs, and a relay, so it's ideal for automating low-voltage systems in your home.\u003c\/p\u003e\n\u003cp\u003eJust slot in your micro:bit, then code automation:bit with the block-based\u003cspan\u003e \u003c\/span\u003eMicrosoft MakeCode editor. Hook up buttons to the inputs, use the built-in buttons on micro:bit, or the light-sensing capability of the LED matrix to control devices connected to automation:bit. Or why not use a second micro:bit's radio function as a remote control?\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWARNING! automation:bit should not be used with voltages greater than 24V and especially not with mains voltages!\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eComes fully-assembled and ready to use\u003c\/li\u003e\n\u003cli\u003e1 x 24V @ 2A relay (NC and NO terminals)\u003c\/li\u003e\n\u003cli\u003e3 x ADC channels (0-24V range)\u003c\/li\u003e\n\u003cli\u003e3 x 24V tolerant buffered inputs\u003c\/li\u003e\n\u003cli\u003e3 x 24V tolerant sinking outputs\u003c\/li\u003e\n\u003cli\u003e3.5mm screw terminals\u003c\/li\u003e\n\u003cli\u003eCompatible with micro:bit\u003c\/li\u003e\n\u003cli\u003eMicrosoft MakeCode support\u003c\/li\u003e\n\u003cli\u003eNo soldering required!\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSoftware \u003c\/h2\u003e\n\u003cp\u003eYou can code automation:bit with the block-based\u003cspan\u003e \u003c\/span\u003eMicrosoft MakeCode editor, that'll get you started with using all of automation:bit's functionality.\u003c\/p\u003e\n\u003cp\u003eTo add the automation:bit library in MakeCode, click on the cog at the top right hand corner, then \"Add Package\", then enter the URL \"https:\/\/github.com\/pimoroni\/pxt-automationbit\". You can find full instructions at the\u003cspan\u003e \u003c\/span\u003eGitHub repository for the library.\u003c\/p\u003e","brand":"Pimoroni","offers":[{"title":"Default Title","offer_id":48623790555354,"sku":"edx1789678650018","price":14.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0824\/8318\/3834\/files\/automationbit_1.jpg?v=1789678654"},{"product_id":"game-zip-64-for-the-bbc-microbit","title":":GAME ZIP 64 for the BBC micro:bit","description":"\u003cp\u003eThe Kitronik :GAME ZIP 64 is the ultimate retro gaming accessory for the BBC\u003cspan\u003e \u003c\/span\u003emicrobit. It has been designed to be an all in one hand held gaming platform, which also includes a built in, 64 (8x8) individually addressable full colour ZIP LED, screen.\u003c\/p\u003e\n\u003cp\u003eIt features on-board sound, 4 x directional buttons, 2 fire buttons, haptic feedback, and breakout points so shoulder buttons or I2C devices can be added. All of these features are fully programmable. We have also included breakout points to allow for the use of larger LED screens.\u003c\/p\u003e\n\u003cp\u003eAll of microbits features are still available when plugged in to the :GAME ZIP 64, so your games can still make use of the LED matrix, accelerometer etc.\u003c\/p\u003e\n\u003cp\u003ePower is provided via the built in 3 x AA battery cages which have been ergonomically placed to act as hand grips which makes the :GAME ZIP 64 comfortable to hold and play.\u003c\/p\u003e\n\u003cp\u003eWe have produced some example games in both\u003cspan\u003e \u003c\/span\u003eMakeCode Blocks\u003cspan\u003e \u003c\/span\u003eand\u003cspan\u003e \u003c\/span\u003eMicroPython\u003cspan\u003e \u003c\/span\u003ethat can be freely downloaded from the resources section below so you can begin playing games straight away. If you prefer to code your own games, it also offers the perfect platform for developing and testing micro:bit games.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/www.kitronik.co.uk\/img\/game-zip-64-microbit-games.jpg?width=700\" alt=\"plug and play cartridges\" width=\"100%\"\u003e\u003ci\u003e\u003c\/i\u003e\u003c\/p\u003e\n\u003ccenter\u003e\u003ci\u003eFor illustration purposes only. The cartridges are shown with a :GAME in a custom case that is not included.\u003c\/i\u003e\u003c\/center\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe Kitronik\u003cspan\u003e \u003c\/span\u003eMI:pro\u003cspan\u003e \u003c\/span\u003eprotector cases can be used to create a game 'cartridge' that can be labeled and that will not only protect the microbit from damage, but also from accidental overwriting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe BBC microbit is NOT included.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAll in one hand-held gaming solution for the BBC micro:bit.\u003c\/li\u003e\n\u003cli\u003e64 individually addressable ZIP LED display screen.\u003c\/li\u003e\n\u003cli\u003eFully programmable on-board sound, directional buttons, fire buttons, and haptic feedback.\u003c\/li\u003e\n\u003cli\u003eBreakout pads for adding shoulder buttons or I2C devices.\u003c\/li\u003e\n\u003cli\u003eBreakout pads for driving larger LED screens.\u003c\/li\u003e\n\u003cli\u003eErgonomic design for comfortable game-play.\u003c\/li\u003e\n\u003cli\u003eUse\u003cspan\u003e \u003c\/span\u003eMI:pro\u003cspan\u003e \u003c\/span\u003eprotector cases to create a handy game cartridge.\u003c\/li\u003e\n\u003cli\u003eIt can also be coded to be a controller for your buggy or robotics projects.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eContents:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 x :GAME ZIP 64 for the BBC microbit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"Kitronik","offers":[{"title":"Default Title","offer_id":48623790817498,"sku":"sdm1789678639420","price":28.02,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0824\/8318\/3834\/files\/game-zip-64-for-the-bbc-microbit_1.jpg?v=1789678666"},{"product_id":"sensor-for-microbit","title":"Sensor for micro:bit","description":"\u003cp\u003eThe MonkMakes Sensor Board for micro:bit allows you to sense sound level, temperature and light level.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e3V and GND connections can be made from either side and allow you to power a second board such as the\u003cspan\u003e \u003c\/span\u003eMonkMakes Relay Board\u003cspan\u003e \u003c\/span\u003eor\u003cspan\u003e \u003c\/span\u003eMonkMakes Speaker.\u003c\/li\u003e\n\u003cli\u003eLED ‘power on’ indicator\u003c\/li\u003e\n\u003cli\u003eReverse polarity protection\u003c\/li\u003e\n\u003cli\u003eAll three sensors are analog and can be connected to pins P0, P1 and P2 using alligator clips.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eGetting Started\u003c\/h2\u003e\n\u003cp\u003eConnecting to your micro:bit\u003c\/p\u003e\n\u003cp\u003eYou only have to wire up the sensors that you are actually using, but you could wire all the sensors up as shown below. The code examples below assume that pin 0 is used for sound, pin 1 for temperature and pin 2 for light. You can use any pin for any of the sensors, but remember to modify the code to match the pin you are using.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/sound_sensing-591x1024.png?v=1512400300\u0026amp;width=700\" alt=\"\"\u003e\u003c\/p\u003e\n\u003ch2\u003eSound\u003c\/h2\u003e\n\u003cp\u003eThe Sensor for micro:bit uses a MEMs (microphone on a chip) and a pre-amplifier. The output of the sound sensor is connected to an analog input where it can be sampled. The sound signal varies about the 1.5V level. So, silence will produce an analog output of around 1.5V. When there is sound the analog readings will oscillate above and below the 1.5V level like this:\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/scope_speach-annotated-1024x355.png?v=1512400335\u0026amp;width=700\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003eThis is why 511 is subtracted from the readings in the code examples below.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eJavaScript Blocks Editor\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eHere is an example of using the Sensor Board to display a bargraph to indicate the sound level. Click on the image below to try it out. Making a noise into the microphone will make the LEDs dance.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/sound_block-1024x184.png?v=1512400386\u0026amp;width=700\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMicroPython\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ccode\u003efrom microbit import *\u003cbr\u003e\u003cbr\u003edef bargraph(a):\u003cbr\u003edisplay.clear()\u003cbr\u003efor y in range(0, 5):\u003cbr\u003eif a \u0026gt; y:\u003cbr\u003efor x in range(0, 5):\u003cbr\u003edisplay.set_pixel(x, 4-y, 9)\u003cbr\u003e\u003cbr\u003ewhile True:\u003cbr\u003esound_level = (pin0.read_analog() - 511) \/ 100\u003cbr\u003ebargraph(sound_level)\u003c\/code\u003e\u003c\/p\u003e\n\u003ch2\u003eTemperature\u003c\/h2\u003e\n\u003cp\u003eThe Sensor for micro:bit uses a thermistor to measure temperature. The temperature output from the board is a voltage that indicates the temperature. This is then measured using an analog input on the micro:bit.\u003c\/p\u003e\n\u003cp\u003eThe calculations for converting this voltage reading to an actual temperature are quite complicated and so the code examples here will only give a rough idea of temperature.\u003c\/p\u003e\n\u003cp\u003eIf you want your temperatures in Fahrenheit, then multiply the temperature in degrees C by 9, divide the result by 5 and then add 32.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eJAVASCRIPT BLOCKS EDITOR\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis is an example of using the Sensor Board to display the temperature, try putting your finger on the temperature sensor to warm it up. You can run the example below by clicking on it.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/thermometer_blocks-1024x310.png?v=1512400524\u0026amp;width=700\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMicroPython\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ccode\u003efrom microbit import *\u003cbr\u003e\u003cbr\u003ewhile True:\u003cbr\u003ereading = pin1.read_analog()\u003cbr\u003etemp_c = int(reading \/ 13.33 - 14)\u003cbr\u003edisplay.scroll(str(temp_c))\u003cbr\u003esleep(500)\u003c\/code\u003e\u003c\/p\u003e\n\u003ch2\u003eLight\u003c\/h2\u003e\n\u003cp\u003eThe light sensor uses a phototransistor to measure the light level and produces an output voltage that increases as the light level increases. Here is a guide to the kind of light level you might get from the sensor under different conditions (0 to 1023).\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDark 0 to 3\u003c\/li\u003e\n\u003cli\u003eDimly lit room 6 to 10\u003c\/li\u003e\n\u003cli\u003eIndoors directly under a light 10 to 50\u003c\/li\u003e\n\u003cli\u003eOutdoors (dull day) 100 to 200\u003c\/li\u003e\n\u003cli\u003eOutdoors (sunny day) 800 to 900\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eEven though the maximum analog read value is 1023, the maximum reading from this sensor is around 900.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eJAVASCRIPT BLOCKS EDITOR\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eHere is an example of using the Sensor Board to display a bargraph to indicate the light level. Click on the image below to try it out. Put your finger over the light sensor to make it dark or shine a flash-light onto it to make more LEDs light up.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/microbit-screenshot-sensor-1024x212.png?v=1512400668\u0026amp;width=700\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMicroPython\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ccode\u003efrom microbit import *\u003cbr\u003e\u003cbr\u003edef bargraph(a):\u003cbr\u003edisplay.clear()\u003cbr\u003efor y in range(0, 5):\u003cbr\u003eif a \u0026gt; y:\u003cbr\u003efor x in range(0, 5):\u003cbr\u003edisplay.set_pixel(x, 4-y, 9)\u003cbr\u003e\u003cbr\u003ewhile True:\u003cbr\u003elight_level = pin2.read_analog() \/ 10\u003cbr\u003ebargraph(light_level)\u003c\/code\u003e\u003c\/p\u003e","brand":"Monk Makes","offers":[{"title":"Default Title","offer_id":48623790883034,"sku":"wcy1789678647013","price":9.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0824\/8318\/3834\/files\/sensor-for-microbit_1.jpg?v=1789678674"},{"product_id":"servolite-board-for-microbit","title":"Servo:Lite board for micro:bit","description":"\u003cp\u003eThis Servo:Lite board for the micro:bit can form the control hub for your robotics project, control up to three servos \u0026amp; has 5 x RGB ZIP LEDs on board.\u003c\/p\u003e\n\u003cp\u003eThe Servo:Lite board for the micro:bit is a simple board that allows you to easily connect and control low power servo motors (servo's must be capable of operating at 3.3V) using the micro:bit. It is connected to the micro:bit using five bolts. Connect two servos in standard configuration and it can drive up to 3 servos if the addressable ‘ZIP’ LEDs aren’t needed.\u003c\/p\u003e\n\u003cp\u003eIt is powered by 3 AAA batteries and also supplies power to the micro:bit, the board features an on\/off switch so when it's not in use the batteries won't drain.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/4VyRh0aQeIQ\" frameborder=\"0\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003eThe board also features 5 x RGB individually addressable ZIP LEDs (NeoPixel-compatible) and additional external ZIP LEDs can be connected to the board as required.\u003c\/p\u003e\n\u003cp\u003eKitronik has produced a range of tutorials and guides that can be found in the resources section below. They have guides detailing; how to control a third servo and how to write code for the on-board ZIP LEDs.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eConnect two servos in standard con?guration and can drive up to 3 servos if the addressable ‘ZIP’ LEDs aren’t needed\u003c\/li\u003e\n\u003cli\u003ePowered by 3 AAA batteries that also supply power to the (not supplied)\u003c\/li\u003e\n\u003cli\u003eOn\/off switch\u003c\/li\u003e\n\u003cli\u003e5 x RGB addressable ZIP LEDs (NeoPixel-compatible). Additional external ZIP LEDs can be connected to the board.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eContents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Servo:Lite board with battery holder pre-fitted\u003c\/li\u003e\n\u003cli\u003e5 x M3x8 counter-sunk Pozi Steel screws\u003c\/li\u003e\n\u003cli\u003e1 x Perspex spacer\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eDimensions\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eLength: 55mm\u003c\/li\u003e\n\u003cli\u003eHeight: 52mm\u003c\/li\u003e\n\u003cli\u003eHeight: 17mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eRequires\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e3 x AAA batteries\u003c\/li\u003e\n\u003cli\u003e1 x BBC micro:bit\u003c\/li\u003e\n\u003cli\u003eServos\u003c\/li\u003e\n\u003cli\u003eScrewdriver\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eKitronik Custom MakeCode Editor Servo Blocks (Use this URL to add them to the Editor)\u003c\/li\u003e\n\u003cli\u003eGuide For Kitronik Custom MakeCode Editor Servo Blocks\u003c\/li\u003e\n\u003cli\u003eGetting Started With The Servo:Lite board\u003c\/li\u003e\n\u003cli\u003eGuide For Controlling 3 Servos With The Servo:Lite board\u003c\/li\u003e\n\u003cli\u003eGuide For Using Kitronik ZIP LEDs With The BBC microbit\u003c\/li\u003e\n\u003cli\u003eWS2812B Datasheet\u003c\/li\u003e\n\u003cli\u003eServo:Lite board Datasheet\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Kitronik","offers":[{"title":"Default Title","offer_id":48623792324826,"sku":"glt1789678711331","price":11.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0824\/8318\/3834\/files\/servolite-board-for-microbit_1.jpg?v=1789678715"},{"product_id":"speaker-for-microbit","title":"Speaker for micro:bit","description":"\u003cp\u003eThe MonkMakes Speaker for micro:bit is a neat little amplified speaker that connects to your micro:bit using alligator clips.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAmplified output\u003c\/li\u003e\n\u003cli\u003eLED ‘power on’ indicator\u003c\/li\u003e\n\u003cli\u003eReverse polarity protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eGetting Started\u003c\/h2\u003e\n\u003cp\u003eConnecting to your micro:bit\u003c\/p\u003e\n\u003cp\u003eConnect the Speaker to the micro:bit as shown below. When attaching the alligator clips to the micro:bit, make sure that the clips are perpendicular to the board so that they are not touching any of the neighbouring connectors on the micro:Bit edge connector.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/wiring_speaker.png?v=1512398482\u0026amp;width=700\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHEX File\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe quickest way to try out your speaker is to\u003cspan\u003e \u003c\/span\u003eDOWNLOAD THIS HEX FILE\u003cspan\u003e \u003c\/span\u003eand then copy it onto your micro:bit. Press Button A to hear a tune being played.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eJavaScript Blocks Editor\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eVisit the\u003cspan\u003e \u003c\/span\u003eBlocks Editor\u003cspan\u003e \u003c\/span\u003ein your browser and then from the\u003cspan\u003e \u003c\/span\u003e\u003cem\u003einput\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003esection add an\u003cspan\u003e \u003c\/span\u003e\u003cem\u003eon button A pressed\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003eblock then from the\u003cspan\u003e \u003c\/span\u003e\u003cem\u003emusic\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003esection add a\u003cspan\u003e \u003c\/span\u003e\u003cem\u003estart melody\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003eblock and select the tune you want to play (in this case,\u003cspan\u003e \u003c\/span\u003e\u003cem\u003eentertainer\u003c\/em\u003e).\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/play_tune_block_ed_closeup-1024x186.png?v=1512398631\u0026amp;width=700\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003eClick Download and then copy the file onto your micro:bit.\u003c\/p\u003e\n\u003cp\u003eYou can also open the project in the Blocks Editor by clicking on the image below.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/play_tune_block_ed-1024x437.png?v=1512398671\u0026amp;width=700\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003eYou can also make a simple musical instrument, using this tutorial: https:\/\/makecode.microbit.org\/projects\/hack-your-headphones\/code\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMicroPython\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePaste the following code into the Python window and then Download the file and copy it onto your your micro:bit\u003c\/p\u003e\n\u003cp\u003e\u003ccode\u003efrom microbit import *\u003cbr\u003eimport music\u003cbr\u003e\u003cbr\u003ewhile True:\u003cbr\u003e if button_a.was_pressed():\u003cbr\u003e music.play(music.ENTERTAINER)\u003c\/code\u003e\u003c\/p\u003e\n\u003cp\u003eWhen you press button A you will hear the tune “The Entertainer” play through the speaker.\u003c\/p\u003e","brand":"Monk Makes","offers":[{"title":"Default Title","offer_id":48623792455898,"sku":"hyb1789678724729","price":7.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0824\/8318\/3834\/files\/speaker-for-microbit_1.jpg?v=1789678728"},{"product_id":"envirobit","title":"enviro:bit","description":"\u003cp\u003eSense the world around you with enviro:bit! It's loaded with sensors for air and weather, colour and light, and sound, and slots right onto your\u003cspan\u003e \u003c\/span\u003emicro:bit.\u003c\/p\u003e\n\u003cp\u003eJust slot in your micro:bit, then code enviro:bit with the block-based\u003cspan\u003e \u003c\/span\u003eMicrosoft MakeCode editor, or with MicroPython in the\u003cspan\u003e \u003c\/span\u003eMu code editor. The sensors go hand-in-hand really well with the LED matrix on micro:bit, letting you graph sensors readings or have the LEDs react to sound, for example.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eComes fully-assembled and ready to use\u003c\/li\u003e\n\u003cli\u003eBME280 temperature, pressure, and humidity sensor\u003c\/li\u003e\n\u003cli\u003eTCS3472 light and colour sensor\u003c\/li\u003e\n\u003cli\u003eMEMS microphone\u003c\/li\u003e\n\u003cli\u003eCompatible with micro:bit\u003c\/li\u003e\n\u003cli\u003eMicrosoft MakeCode and MicroPython support\u003c\/li\u003e\n\u003cli\u003eNo soldering required!\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSoftware \u003c\/h2\u003e\n\u003cp\u003eYou can code enviro:bit with the block-based\u003cspan\u003e \u003c\/span\u003eMicrosoft MakeCode editor, that'll get you started with using the sensor readings from enviro:bit, if you want to delve deeper, then you can use MicroPython in the\u003cspan\u003e \u003c\/span\u003eMu code editor.\u003c\/p\u003e\n\u003cp\u003eTo add the enviro:bit library in MakeCode, click on the cog at the top right hand corner, then \"Add Package\", then search for \"envirobit\". You can find full instructions at the\u003cspan\u003e \u003c\/span\u003eGitHub repository for the library.\u003c\/p\u003e\n\u003cp\u003eOur MicroPython library for enviro:bit is also\u003cspan\u003e \u003c\/span\u003eavailable at GitHub, again with full instructions on how to get going with it.\u003c\/p\u003e","brand":"Pimoroni","offers":[{"title":"Default Title","offer_id":48623792521434,"sku":"moi1789678720578","price":21.21,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0824\/8318\/3834\/files\/envirobit_1.jpg?v=1789678732"},{"product_id":"adafruit-dragontail-for-microbit-fully-assembled","title":"Adafruit DragonTail for micro:bit - Fully Assembled","description":"\u003cp\u003eSometimes I dream of having a miniature pet dragon that would sit on my shoulder, while I write code and build projects. Maybe its little snorts of fire could even heat up my soldering iron after I turn it on? An adorable fantasy, I know... So while we're all waiting for genetic engineering to catch up with our desires, this DragonTail breakout will have to do!\u003c\/p\u003e\u003cp\u003eThe BBC micro:bit is a cute, all-in-one learning board, with LEDs, sensors, and even a Bluetooth LE radio built in. What it \u003cem\u003edoesn't\u003c\/em\u003e have is a set of 0.1\" headers, for breadboard compatibility. Instead, there's a PCB 'card edge' connector that can slot into a matching socket. Now, if you want to hook up a servo, some NeoPixels, or some other simple component, you could use our alligator-to-header cables, and that will let you connect one or two parts to the power and P0, P1 or P2 pads. But...those alligator clips can slip around, and you don't get access to some of the more fun i\/o pins, like I2C.\u003c\/p\u003e\u003cp\u003eSo, we made the\u003cstrong\u003e Adafruit\u003c\/strong\u003e \u003cstrong\u003eDragonTail for micro:bit\u003c\/strong\u003e. This breakout board has the card-edge connector for your micro:bit, and then breaks out all the pads so that it can be plugged in to any solderless breadboard. You even get two pads for the power railing! It comes \u003cstrong\u003efully assembled\u003c\/strong\u003e - no soldering required. And every pad is clearly labeled: by name, if it has an analog input, and when it is shared with the LED matrix.\u003c\/p\u003e\u003cp\u003eWould you expect any less from your friendly pet dragon?\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003ch2\u003eTechnical Details\u003c\/h2\u003e\u003cdiv id=\"tab-technical-details-content\" class=\"panel-collapse collapse in\"\u003e \u003cdiv class=\"row\"\u003e \u003cdiv class=\"col-lg-12 col-md-12 col-sm-12 col-xs-12\"\u003e\n\u003cp\u003e\u003cstrong\u003ePCB Dimensions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e57mm x 53.5mm x 19mm \/ 2.2\" x 2.1\" \/ 0.7\"\u003c\/li\u003e\n\u003cli\u003eWidth of T: 10.2mm \/ 0.4\"\u003c\/li\u003e\n\u003cli\u003eWeight: 18.2g \/ 0.72oz\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eProduct Weight: 18.2g \/ 0.6oz \u003c\/p\u003e\n\u003c\/div\u003e \u003c\/div\u003e\n\u003cul id=\"product-files\"\u003e \u003c\/ul\u003e \u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e \u003c\/div\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":48623804350682,"sku":"knm1789679038680","price":9.04,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0824\/8318\/3834\/files\/adafruit-dragontail-for-microbit---fully-assembled_1.jpg?v=1789679043"},{"product_id":"prong-soil-moisture-sensor-for-bbc-microbit","title":"Prong Soil Moisture Sensor for BBC micro:bit","description":"\u003cp\u003eThe Prong soil moisture sensor for BBC microbit is a sensor board that can be directly mounted to a BBC micro:bit to monitor the moisture present in soil. The two conductive tines are placed into the soil. Any water or moisture in the soil will conduct to give an analogue voltage that can be read by the BBC micro:bit.\u003c\/p\u003e \u003cp\u003eProng is powered from the 3V supply of the BBC micro:bit. Use either the USB or JST connector on the BBC micro:bit to power the circuit. Prong and the BBC micro:bit can also be powered from the Mi:Power board to create a compact stand alone unit.\u003c\/p\u003e \u003cp\u003eThe board has been designed so that the BBC micro:bit can be bolted on using 3 x M3 nuts and 3 x M3 screws. Place the screws through the P1, 3V and GND holes of the PCB and BBC micro:bit, then use the M3 nuts to fasten together on the back of BBC micro:bit. Alternatively crocodile clips can be used to connect between the Prong and the BBC micro:bit.\u003c\/p\u003e \u003cp\u003eIf using the Mi:Power board then additionally connecting P0 means the BBC micro:bit can sound an alarm if the soil becomes too dry.\u003c\/p\u003e \u003cp\u003eWhen fitted to the Prong moisture sensor, the micro:bit can be coded via any of the micro:bit editors, such as the Microsoft MakeCode editor.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNote\u003c\/strong\u003e: To ensure that the Prong moisture sensor has a long and fulfilling life, it is better to write your code to perform a moisture check every so often rather than continuously. When the check is performed continuously it promotes rapid erosion of the electrodes.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e:\u003c\/p\u003e \u003cul\u003e \u003cli\u003eMeasure soil moisture levels\u003c\/li\u003e \u003cli\u003eAttaches directly to the micro:bit\u003c\/li\u003e \u003cli\u003eUse in conjunction with the Mi:Power board to provide power and an audible alarm\u003c\/li\u003e \u003cli\u003eCode with any microbit coding editor\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eContents\u003c\/strong\u003e:\u003c\/p\u003e \u003cul\u003e \u003cli\u003e1 x Prong Soil Moisture Sensor for micro:bit\u003c\/li\u003e \u003cli\u003e3 x M3 Hex Nuts\u003c\/li\u003e \u003cli\u003e3 x M3 Countersunk Screws\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e:\u003c\/p\u003e \u003cul\u003e \u003cli\u003eLength: 68mm\u003c\/li\u003e \u003cli\u003eHeight: 53mm\u003c\/li\u003e \u003cli\u003ePCB Thickness: 1.6mm\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eRequires\u003c\/strong\u003e:\u003c\/p\u003e \u003cul\u003e \u003cli\u003e1 x BBC micro:bit\n\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eResources\u003c\/strong\u003e:\u003c\/p\u003e \u003cul\u003e \u003cli\u003eDatasheet\u003c\/li\u003e \u003c\/ul\u003e","brand":"Kitronik","offers":[{"title":"Default Title","offer_id":48624072917210,"sku":"vnf1789681745220","price":3.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0824\/8318\/3834\/files\/prong-soil-moisture-sensor-for-bbc-microbit_1.jpg?v=1789681749"},{"product_id":"klip-halo-v20-with-jst","title":"Klip Halo V2.0 with JST","description":"\u003cp\u003eThe JST version of the Klip Halo V2.0 board for the BBC micro:bit breaks out each of the 19 GPIO pins from the BBC micro:bit, with easily accessible, clearly marked connection points compatible with both crocodile clips and 4mm banana plugs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis is the V2 model\u003c\/strong\u003e with an edge connector. Prefer to screw mount? Check out the V1 model. A AA battery holder version is also available.\u003c\/p\u003e\n\u003cp\u003eThe edge connector allows simple assembly by inserting the BBC micro:bit into the Klip Halo V2.0.\u003c\/p\u003e\n\u003cp\u003eThe Klip Halo V2.0 with JST has an integrated connector for 3V power, and an on\/off switch. The connector is the same as on the BBC micro:bit, so BBC micro:bit battery packs will plug in.\u003cstrong\u003e DO NOT\u003c\/strong\u003e use with LiPo batteries. The switch also turns on \/off the power to the 3V connections.\u003c\/p\u003e\n\u003cp\u003eThe board has been designed so that the BBC micro:bit can be slotted into the edge connector. No tools are required for installation.\u003c\/p\u003e\n\u003cp\u003eUses for the Klip Halo V2.0 could include attaching external components using crocodile clips, or connecting to wearable electro-fashion products.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNot suitable for use with LiPo batteries.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBreaks out the microbits 19 GPIO pins to clearly marked connection points compatible with both crocodile clips and 4mm banana plugs.\u003c\/li\u003e\n\u003cli\u003eFeatures an edge connector that the microbit inserts into so no assembly required.\u003c\/li\u003e\n\u003cli\u003eThe board has an on\/off switch that also turns off power to the 3V connections.\u003c\/li\u003e\n\u003cli\u003eDesigned for use with either crocodile clips or conductive thread.\u003c\/li\u003e\n\u003cli\u003eIt also features a JST style power input connection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eContents:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Klip Halo V2.0 Board (with JST) for the BBC micro:bit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLength: 80mm.\u003c\/li\u003e\n\u003cli\u003eWidth: 80mm.\u003c\/li\u003e\n\u003cli\u003eThickness: 18mm.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRequires:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eA\u003cspan\u003e \u003c\/span\u003eBBC micro:bit\n\u003c\/li\u003e\n\u003cli\u003eBattery box with JST connector\u003c\/li\u003e\n\u003cli\u003eBatteries compatible with your battery box\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eResources:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDatasheet\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Kitronik","offers":[{"title":"Default Title","offer_id":48624073113818,"sku":"flz1789681761990","price":7.11,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0824\/8318\/3834\/files\/klip-halo-v20-with-jst_1.jpg?v=1789681766"},{"product_id":"stopbit-traffic-light-for-bbc-microbit","title":"STOP:bit - Traffic Light for BBC micro:bit","description":"\u003cp\u003e\u003cstrong\u003e\u003c\/strong\u003eThe STOP:bit for the BBC micro:bit is the ultimate upgrade for traffic light\/pedestrian crossing projects. Love it or hate it, variations of the pedestrian crossing project have been around for decades. The Kitronik STOP:bit is a purpose-built accessory that can only lead to a more enjoyable project with a nicer looking end result.\u003c\/p\u003e\n\u003cp\u003eThe STOP:bit is a bolt-on\/clip-on board for the BBC micro:bit replicating a traffic light. The PCB has been designed to have the same physical features of a traffic light, with the addition of a BBC micro:bit as the pedestrian crossing control box.\u003c\/p\u003e\n\u003cp\u003eThe STOP:bit has 3 10mm diameter LEDs. Each of these LEDs is driven from one of the BBC micro:bit IO pins. Power to the LEDs is supplied from the BBC micro:bit connections. STOP:bit is supplied with 4 countersunk screws which gives you the option of bolting the microbit directly onto the STOP:bit. Alternatively, crocodile clips can be used between the pads on the STOP:bit and the corresponding pads on the microbit.\u003c\/p\u003e\n\u003cp\u003eIf your scope is larger than a single traffic light, you can use the microbits radio module to communicate with other lights if they also have a microbit attached. This is great for exploring traffic management in a town or city.\u003c\/p\u003e\n\u003cp\u003eWe have also had some custom blocks added to the MakeCode Editor to make the job of coding this project much more simple. This will allow you to do this project in class with younger students. This is further reinforced by STOP:bit being pre-assembled, so there is no soldering or fiddly mechanical fixings, other than those used to secure the microbit, to worry about. However, you are not confined to using our custom blocks, you can also use the 'digital write pin' block.\u003c\/p\u003e\n\u003cp\u003eTo add our custom blocks to the editor; Click on the cog in the top right of the editor and select 'Add Package' from the menu. This will open a dialog window with a search box. Type Kitronik into the search box and all of our custom blocks will appear as tiles. Scroll down and select the tile tittled 'kitronik-stopbit' and it will be added to the blocks menu.\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eUpgrade your microbit traffic light\/pedestrian crossing projects\u003c\/li\u003e\n\u003cli\u003eCode it with the Microsoft\u003cspan\u003e \u003c\/span\u003eMakeCode Editor\n\u003c\/li\u003e\n\u003cli\u003eWe have added some custom blocks to the MakeCode Editor to make the job of coding more straightforwards, which opens up the project to younger children\u003c\/li\u003e\n\u003cli\u003eAttach the BBC micro:bit directly to STOP:bit for a tidy wireless project\u003c\/li\u003e\n\u003cli\u003eIf using multiple STOP:bits you can use radio to coordinate traffic management\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eContains\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1 x STOP:bit for the BBC micro:bit\u003c\/li\u003e\n\u003cli\u003e5 x M3 8mm Countersunk Screws.\u003c\/li\u003e\n\u003cli\u003e5 x M3 Hex Full Nut.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eDimensions\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eLength: 120mm\u003c\/li\u003e\n\u003cli\u003eBase Width: 38mm\u003c\/li\u003e\n\u003cli\u003eHeight: 15.6mm\u003c\/li\u003e\n\u003cli\u003ePCB Thickness: 1.6mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eRequires\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBBC micro:bit\u003c\/li\u003e\n\u003cli\u003eType-A to Micro-B USB Cable\u003c\/li\u003e\n\u003cli\u003eMakeCode Editor\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eTeaching Resources\u003c\/li\u003e\n\u003cli\u003eDatasheet\u003c\/li\u003e\n\u003cli\u003eDemo Code for programming in MicroPython is\u003cspan\u003e \u003c\/span\u003eavailable from GitHub\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Kitronik","offers":[{"title":"Pre-assembled","offer_id":48624073801946,"sku":"kwj1789681802375","price":3.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0824\/8318\/3834\/files\/stopbit---traffic-light-for-bbc-microbit_1.jpg?v=1789681807"},{"product_id":"zip-halo-hd-for-the-bbc-microbit","title":"ZIP Halo HD for the BBC micro:bit","description":"\u003cp\u003eThe Kitronik Halo HD board for the BBC micro:bit incorporates 60 individually addressable full colour ZIP LEDs. It also breaks out P1 and P2 to a standard 0.1 footprint, it features a MEMS microphone for detection of sound, and a piezo buzzer to play sound.\u003c\/p\u003e\n\u003cp\u003eWe also stock the standard 24 LED Zip Halo.\u003c\/p\u003e\n\u003cp\u003eIf that wasn't enough, it also features an onboard real time clock (RTC) controlled by I2C lines from the\u003cspan\u003e \u003c\/span\u003emicrobit. The board also has two M3 mounting holes. We think you'll agree, the board is loaded with useful features. It doesn't stop there...\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlug n Play:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eNo tools required, not even a screwdriver, plug the micro:bit,\u003cspan\u003e \u003c\/span\u003eavailable separately, straight into the onboard edge connector and you are good to go!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOnboard Power:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eThe board has a 3xAA battery holder mounted on the rear, with a power switch on the front of the board. A regulated supply is produced on the board which is fed into the 3V and GND connections to power the connected BBC micro:bit, removing the need to power the BBC micro:bit separately. See the\u003cspan\u003e \u003c\/span\u003eDatasheet\u003cspan\u003e \u003c\/span\u003efor more information.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMakeCode Blocks:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eKitronik have created custom blocks for the Halo HD for use with MakeCode. To add these blocks, first go to\u003cspan\u003e \u003c\/span\u003emakecode.microbit.org\u003cspan\u003e \u003c\/span\u003eand start a new project. Under the Advanced section click on Extensions. In the next window search for Halo HD. Then, click on the tile to import it into MakeCode. You will see that the blocks are split across three categories; ZIP LEDs, Microphone and Clock. You can find more information on the MakeCode editor and also on how to write code for it with MicroPython in the\u003cspan\u003e \u003c\/span\u003eDatasheet.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eExamples:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eTo get you off to a flying start we have produced a number of code examples that cover all of the onboard features and that will also serve to inspire your own projects. You will find links to these examples in the resources section below.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe board features 60 individually addressable full colour ZIP LEDs.\u003c\/li\u003e\n\u003cli\u003eIt breaks out P1 and P2 to a standard 0.1 footprint.\u003c\/li\u003e\n\u003cli\u003eIt's wired for sound with a MEMS microphone and a piezo buzzer.\u003c\/li\u003e\n\u003cli\u003eIt has an onboard Real time clock (RTC) controlled by I2C lines.\u003c\/li\u003e\n\u003cli\u003ePlug n play with the onboard edge connector, no tools required!.\u003c\/li\u003e\n\u003cli\u003eThe board has a 3xAA battery holder mounted on the rear.\u003c\/li\u003e\n\u003cli\u003eThe On\/off switch helps you maximise battery life.\u003c\/li\u003e\n\u003cli\u003eIt can be coded with MakeCode blocks via our custom blocks or with MicroPython.\u003c\/li\u003e\n\u003cli\u003e2 x M3 Mounting holes, for secure projects.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eContents:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 x :VIEW ZIP Halo HD Board for micro:bit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDiameter: 87mm.\u003c\/li\u003e\n\u003cli\u003eM3 Mounting Holes Spacing (Center to Center): 68.4mm.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRequires:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 x\u003cspan\u003e \u003c\/span\u003emicro:bit\n\u003c\/li\u003e\n\u003cli\u003e1 x\u003cspan\u003e \u003c\/span\u003eUSB Type-A to Micro-B USB Noodle Cable\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eResources:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDatasheet\u003c\/li\u003e\n\u003cli\u003eThe ZIP Halo HD can also be controlled with MicroPython, code examples for each of the boards features can be found on\u003cspan\u003e \u003c\/span\u003eGitHub here.\u003c\/li\u003e\n\u003cli\u003eWe've produced example code below (zip files) to get you off to a flying start. Collectively, they serve as an introduction to all of the features of the board:\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eCode Clock\u003c\/li\u003e\n\u003cli\u003eClap Game Code\u003c\/li\u003e\n\u003cli\u003eWake Up Light Code\u003c\/li\u003e\n\u003cli\u003eTimer Code\u003c\/li\u003e\n\u003cli\u003eStop Watch Code\u003c\/li\u003e\n\u003cli\u003eSound Meter Code\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e","brand":"Kitronik","offers":[{"title":"Default Title","offer_id":48624075047130,"sku":"ukz1789681803287","price":27.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0824\/8318\/3834\/files\/zip-halo-hd-for-the-bbc-microbit_1.jpg?v=1789681856"},{"product_id":"game-controller-for-bbc-microbit-2","title":":GAME Controller for BBC micro:bit","description":"\u003cp\u003eThe Kitronik :GAME Controller for the BBC micro:bit is a retro gaming accessory for the BBC\u003cspan\u003e \u003c\/span\u003emicro:bit. It is a programmable gamepad-style controller enabling a better gaming experience on the micro:bit itself, or the ability to control other devices over micro:bit radio.\u003c\/p\u003e\n\u003cp\u003eThe :GAME Controller is similar in design and features to the the :GAME ZIP 64, only without the ZIP LED screen. This offers great value if the micro:bits own LED matrix is sufficient for the game or when it will be used to control other devices such as robots and buggies. It will also be much lighter on power consumption than its larger sibling.\u003c\/p\u003e\n\u003cp\u003eIt features on-board sound, 4 x directional buttons, 2 fire buttons, haptic feedback, and breakout points so shoulder buttons can be added. All of these features are fully programmable. The board is powered by two AA batteries, which also power the attached micro:bit.\u003c\/p\u003e\n\u003cp\u003eThe micro:bit connects to the board via the Edge Connector on the :GAME Controller. The micro:bit should be inserted firmly into the edge connector, ensuring that the micro:bit LED display is facing in the same direction as the front of the :GAME Controller.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe BBC microbit is \u003cb\u003enot \u003c\/b\u003eincluded.\u003c\/li\u003e\n\u003cli\u003eExternal Channels: Care should be taken when using the external breakouts for pins 19 and 20 as GPIOs, as this can cause issues with the I2C devices on the micro:bit itself (e.g. compass and accelerometer).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eA hand-held gaming solution for the BBC micro:bit.\u003c\/li\u003e\n\u003cli\u003eFully programmable on-board sound, directional buttons, fire buttons, and haptic feedback.\u003c\/li\u003e\n\u003cli\u003eBreakout pads for adding shoulder buttons.\u003c\/li\u003e\n\u003cli\u003eErgonomic design for comfortable game-play.\u003c\/li\u003e\n\u003cli\u003eIt can also be coded to be a controller for your buggy or robotics projects.\u003c\/li\u003e\n\u003cli\u003eWe have created custom code blocks for the\u003cspan\u003e \u003c\/span\u003eMakeCode Editor\u003cspan\u003e \u003c\/span\u003ethat are available as an Extension to the editor.\u003c\/li\u003e\n\u003cli\u003eThe board features an on\/off switch to power the board on\/off or to act as a reset if the :GAME Controller is in an enclosure where the micro:bits own reset switch cannot be accessed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eContents:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 x :GAME Controller for the BBC microbit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLength: 155mm.\u003c\/li\u003e\n\u003cli\u003eWidth: 60mm.\u003c\/li\u003e\n\u003cli\u003eCenter Width: 30.5mm.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRequires:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2 x\u003cspan\u003e \u003c\/span\u003eAA Batteries\u003c\/li\u003e\n\u003cli\u003eBBC micro:bit\u003c\/li\u003e\n\u003cli\u003eType-A to Micro-B USB Cable\u003c\/li\u003e\n\u003cli\u003eMakeCode Editor\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eResources:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDatasheet\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Kitronik","offers":[{"title":"Default Title","offer_id":48624077570266,"sku":"bat1789681897786","price":14.79,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0824\/8318\/3834\/files\/game-controller-for-bbc-microbit_1.jpg?v=1789681903"},{"product_id":"7-segment-for-microbit","title":"7-Segment for micro:bit","description":"\u003cp\u003eThe 7-segment for micro:bit is a four digit 7-segment display for micro:bit. You can use it to display numbers, but it can also display letters and other characters, albeit with the limits imposed by the 7 segments of each digit.\u003c\/p\u003e \u003cp\u003ePowered directly from micro:bit pins it can be used to send messages to the display using the micro:bit’s Serial blocks.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eResources\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eInstructions - click here\n\u003c\/li\u003e \u003cli\u003eDatasheet - click here\n\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003c\/p\u003e","brand":"Monk Makes","offers":[{"title":"Default Title","offer_id":48624078651610,"sku":"gzg1789681952668","price":13.48,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0824\/8318\/3834\/files\/7-segment-for-microbit_1.jpg?v=1789681956"},{"product_id":"motor-servo-driver-for-microbit","title":"Motor \u0026 Servo Driver for micro:bit","description":"\u003cp\u003e\u003cspan\u003eThis driver board gives your micro:bit (not included) the ability to drive two channel DC motors and three servos. It's a great choice for making a versatile and adaptable micro:bit robot.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eIt features an integrated 5v regulator (up to 3A) allowing your project to be powered by a battery (6-12V) by connecting it to the VIN terminal block.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe board also features terminal blocks for motor connections, standard servo connections and a power switch. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe onboard motor driver can control two motors at a constant current of 1.2A (3.2A peak).\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003emicro:bit edge connector, directly pluggable\u003c\/li\u003e\n\u003cli\u003e2x DC motor interfaces\u003c\/li\u003e\n\u003cli\u003e3x servo interfaces\u003c\/li\u003e\n\u003cli\u003eIntegrated 5V regulator with up to 3A output current\u003c\/li\u003e\n\u003cli\u003eCan be powered from a battery through the VIN terminal\u003c\/li\u003e\n\u003cli\u003ePower switch\u003c\/li\u003e\n\u003cli\u003eOnboard multi-connector options for DC motors in different specifications\u003c\/li\u003e\n\u003cli\u003eStandard servo headers\u003c\/li\u003e\n\u003cli\u003eJST-PH connectors\u003c\/li\u003e\n\u003cli\u003eComes with development resources and manual (micro:bit graphical examples)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eResources\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProduct Wiki and user guide\u003c\/li\u003e\n\u003cli\u003eTB6612FNG Motor Driver datasheet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTech Spec\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePower supply: 6V~12V (VIN terminal)\u003c\/li\u003e\n\u003cli\u003eServo voltage: 5V\u003c\/li\u003e\n\u003cli\u003eLogic voltage: 3.3V\u003c\/li\u003e\n\u003cli\u003eDriver: TB6612FNG\u003c\/li\u003e\n\u003cli\u003eDimension: 65mm x 36mm\u003c\/li\u003e\n\u003cli\u003eMounting hole size: 3.0mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"Waveshare","offers":[{"title":"Default Title","offer_id":48624080158938,"sku":"ajg1789682027272","price":11.28,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0824\/8318\/3834\/files\/motor-servo-driver-for-microbit_1.jpg?v=1789682032"},{"product_id":"bit170-prototyping-breakout-for-microbit","title":"Bit:170 Prototyping Breakout for micro:bit","description":"\u003cp\u003eThis neat little board allows you to easily prototype small circuits on your BBC micro:bit.\u003c\/p\u003e\n\u003cp\u003eYou can use the solderless breadboard to make your circuits without any soldering. Then you can transfer the circuit to the same layout by soldering directly to the PCB.\u003c\/p\u003e\n\u003cp\u003eThe micro:bit is attached using the pre-soldered edge connector. This is the version with a PCB plus solderless breadboard and headers (you need to solder the headers).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote: micro:bit is not included.\u003c\/strong\u003e\u003c\/p\u003e","brand":"4tronix","offers":[{"title":"Default Title","offer_id":48624089661658,"sku":"usg1789682361087","price":5.94,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0824\/8318\/3834\/files\/bit170-prototyping-breakout-for-microbit_1.jpg?v=1789682366"},{"product_id":"ultrasonic-distance-sensor-breakout","title":"Ultrasonic Distance Sensor Breakout","description":"\u003cp\u003eThis breakout is a simple and robust way to add ultrasonic distance sensing to your robot. Supported on 4tronix robots released from July 2019 onwards (including the Robobit Mk3, BitBot XL, MiniBit, Pi2Go Mk2, Pi-Bug (v1.1 and later) and others).\u003c\/p\u003e\n\u003cp\u003eWe also stock the FireLED 5x5 matrix and OLED breakouts!\u003c\/p\u003e\n\u003cp\u003eThis breakout is fully compatible with Pimoroni's breakout garden, so you can plug it into any of the I2C connectors and use it on GPIO pin 4.\u003c\/p\u003e\n\u003cp\u003eIt is a single pin, 3.3V sensor breakout. So the Ping and the Echo are on the same pin.\u003c\/p\u003e\n\u003cp\u003eCode it using standard HC-SR04 code.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote\u003c\/strong\u003e: Robot kits not included!\u003c\/p\u003e","brand":"4tronix","offers":[{"title":"Default Title","offer_id":48624089792730,"sku":"kmm1789682360125","price":4.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0824\/8318\/3834\/files\/ultrasonic-distance-sensor-breakout_1.jpg?v=1789682389"},{"product_id":"ringbit-accessories-kit","title":"Ring:bit Accessories Kit","description":"\u003cp\u003eThis is an accessory add-on kit for the ring:bit V2 robot car. The kit includes a\u003cspan\u003e light-bar module, tracking module and Sonar:bit ultrasonic sensor.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKit contents\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003eTracking module\u003c\/strong\u003e - installed to the front of the ring:bit V2 car to enable it to follow a line\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003eSonar:bit\u003c\/strong\u003e - a special ultrasonic sensor for the ring:bit V2 to help it avoid obstacles\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLight bar\u003c\/strong\u003e - Installed at the front of the ring:bit to add colour and light to your robot\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote\u003c\/strong\u003e: ring:bit V2 car not included but available separately here.\u003c\/p\u003e","brand":"Elecfreaks","offers":[{"title":"Default Title","offer_id":48624090120410,"sku":"ymq1789682404391","price":13.57,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0824\/8318\/3834\/files\/ringbit-accessories-kit_1.jpg?v=1789682410"},{"product_id":"iotbit-for-microbit","title":"iot:bit for micro:bit","description":"\u003cp\u003eThe iot:bit is an expansion board based on IoT for the micro:bit, now compatible with the micro:bit V2! It uses an ESP8266 Wi-Fi expansion board and serial port to communicate with the micro:bit.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eIt has all available IO ports extended from the micro:bit GVS connector, allowing you to connect other components. An onboard buzzer for sound is included alongside a real-time clock (RTC) for accurate timing without a power supply connected 24\/7.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eCompatible with micro:bit V1 and V2.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eIntegrated ESP12F Wi-Fi\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eRTC\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePassive buzzer module\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eExtended most IO ports by GVS\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSilk-screen indication onboard main components\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSeparately lead IIC interface, directly plug in an OLED, BME280 and IIC etc\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eIntegrated buzzer and headphone jack\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAdaptive for building bricks (4 standard spacing building brick fixed holes)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eResources\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFull details, coding and setup instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x iot:bit for micro:bit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCR1220 battery not included\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/h2\u003e\n\u003ctable width=\"374\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd width=\"208\" data-mce-selected=\"1\" data-mce-style=\"width: 177px;\"\u003eDC supply\u003c\/td\u003e\n\u003ctd width=\"166\" data-mce-selected=\"1\" data-mce-style=\"width: 234px;\"\u003eUSB-5V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-mce-selected=\"1\" data-mce-style=\"width: 177px;\"\u003eMaximum power current\u003c\/td\u003e\n\u003ctd data-mce-selected=\"1\" data-mce-style=\"width: 234px;\"\u003e800mA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-mce-selected=\"1\" data-mce-style=\"width: 177px;\"\u003eOperation temperature\u003c\/td\u003e\n\u003ctd data-mce-selected=\"1\" data-mce-style=\"width: 234px;\"\u003e-25~80℃\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-mce-selected=\"1\" data-mce-style=\"width: 177px;\"\u003eWIFI module\u003c\/td\u003e\n\u003ctd data-mce-selected=\"1\" data-mce-style=\"width: 234px;\"\u003eESP8266 ESP12F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-mce-selected=\"1\" data-mce-style=\"width: 177px;\"\u003eBuzzer\u003c\/td\u003e\n\u003ctd data-mce-selected=\"1\" data-mce-style=\"width: 234px;\"\u003ePassive buzzer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-mce-selected=\"1\" data-mce-style=\"width: 177px;\"\u003eRTC timing\u003c\/td\u003e\n\u003ctd data-mce-selected=\"1\" data-mce-style=\"width: 234px;\"\u003eDS1307 RTC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-mce-selected=\"1\" data-mce-style=\"width: 177px;\"\u003eRTC timing battery\u003c\/td\u003e\n\u003ctd data-mce-selected=\"1\" data-mce-style=\"width: 234px;\"\u003eCR1220 button cell (NOT INCLUDED)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-mce-selected=\"1\" data-mce-style=\"width: 177px;\"\u003eSize\u003c\/td\u003e\n\u003ctd data-mce-selected=\"1\" data-mce-style=\"width: 234px;\"\u003e71.00mm X 63.00mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-mce-selected=\"1\" data-mce-style=\"width: 177px;\"\u003eNet weight\u003c\/td\u003e\n\u003ctd data-mce-selected=\"1\" data-mce-style=\"width: 234px;\"\u003e30.00g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Elecfreaks","offers":[{"title":"Default Title","offer_id":48624090153178,"sku":"cyp1789682407976","price":15.24,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0824\/8318\/3834\/files\/iotbit-for-microbit_1.jpg?v=1789682411"},{"product_id":"joystickbit-2-for-microbit","title":"Joystick:bit 2 for micro:bit","description":"\u003cp\u003e\u003cspan\u003eThe joystick:bit V2 is a JoyStick based on the micro:bit (\u003cstrong\u003enot included\u003c\/strong\u003e).\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eIt contains a 4-direction joystick and 4 undefined buttons as a classic JoyStick. At the same time, the board buzzer and vibration motor enhances your gaming experience.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eJoystick:bit V2 can act as a remote control handle for your micro:bit with its compact appearance and comfortable touch.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eOn-board buzzer\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eVibration feedback for an improved game experience\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eMakecode package, simple software\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAutomatic power outage when the micro:bit is removed\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e7 IO ports breakout\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePower supply: 2xAAA Batteries\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eVoltage DC 3V\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eNumber of rockers: 1\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eUndefined buttons: 4\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSize: 109.61mm x 49.56mm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eNet weight: 31.3g\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote: micro:bit not included\u003c\/strong\u003e\u003c\/p\u003e","brand":"Elecfreaks","offers":[{"title":"Default Title","offer_id":48624090382554,"sku":"pkz1789682427549","price":13.46,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0824\/8318\/3834\/files\/joystickbit-2-for-microbit_1.jpg?v=1789682431"},{"product_id":"accessbit-for-bbc-microbit","title":"ACCESS:bit for BBC micro:bit","description":"\u003cp\u003eThe ACCESS:bit is a bolt-on\/clip-on board for the BBC micro:bit that simulates an access barrier. It includes a switch for turning the integrated 3xAAA battery supply on and off and also a buzzer for sound. The ACCESS:bit joins the family of transportation\/pedestrian crossing micro:bit accessories, that also includes; the STOP:bit and LAMP:bit.\u003c\/p\u003e\n\u003cp\u003eThe ACCESS:bit is supplied with a single servo, a barrier, and all of the required fixings. Once the micro:bit has been fitted to the ACCESS:bit its LED matrix is fully visible and therefore can be used to display warning signals, stop\/go symbols or as a light sensor for autonomous actions.\u003c\/p\u003e\n\u003cp\u003eThe ACCESS:bit has been designed to allow for connection to the micro:bit via the supplied M3 countersunk screws or via crocodile clips. For pinout information, please refer to the Datasheet.\u003c\/p\u003e\n\u003cp\u003eKitronik has also produced a set of custom MakeCode editor blocks that make it possible to simplify the task of coding, thus opening up this activity to younger students.\u003c\/p\u003e\n\u003cp\u003eTo add the custom blocks to the MakeCode menu, select the cog in the top right of the editor. Then, select Extensions from the drop down menu. This will bring up the search box, search for Kitronik. Now, select the ACCESS:bit tile and the blocks will be added to the editor.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe ACCESS:bit does not include a micro:bit. The micro:bit is available separately; buy microbit\n\u003c\/li\u003e\n\u003cli\u003eThis kit requires some mechanical assembly\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe ACCESS:bit is an accessory for the BBC micro:bit that simulates an access barrier.\u003c\/li\u003e\n\u003cli\u003eIt features and on\/off switch, integrated battery cage and buzzer for sound.\u003c\/li\u003e\n\u003cli\u003eThe micro:bit can bolt-on\/clip-on to the board.\u003c\/li\u003e\n\u003cli\u003eIt follows the same aesthetic as the STOP:bit and LAMP:bit.\u003c\/li\u003e\n\u003cli\u003eIt can be used in conjunction with the STOP:bit and LAMP:bit for larger projects.\u003c\/li\u003e\n\u003cli\u003eWe have created custom code blocks for the MakeCode Editor that are available as an Extension to the editor.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eContents\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 x ACCESS:bit with integrated battery cage\u003c\/li\u003e\n\u003cli\u003e5 x M3 Countersunk screws and M3 nuts\u003c\/li\u003e\n\u003cli\u003e1 x 180 degree servo\u003c\/li\u003e\n\u003cli\u003eA single access barrier\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHeight: 89mm\u003c\/li\u003e\n\u003cli\u003eMax Width (with barrier fully extended): 125mm\u003c\/li\u003e\n\u003cli\u003eMax Depth (with servo affixed): 30mm\u003c\/li\u003e\n\u003cli\u003ePCB Thickness: 1.6mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRequires\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eA BBC micro:bit\n\u003c\/li\u003e\n\u003cli\u003e3 x AAA Batteries\n\u003c\/li\u003e\n\u003cli\u003eA Screwdriver\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eResources\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDatasheet \u0026amp; Assembly Guide\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Kitronik","offers":[{"title":"Default Title","offer_id":48624101556442,"sku":"qcb1789682731276","price":13.54,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0824\/8318\/3834\/files\/accessbit-for-bbc-microbit_1.jpg?v=1789682736"},{"product_id":"lampbit-street-light-for-bbc-microbit","title":"LAMP:bit - Street Light for BBC micro:bit","description":"\u003cp\u003eThe LAMP:bit features connections which allow the\u003cspan\u003e \u003c\/span\u003emicro:bit\u003cspan\u003e \u003c\/span\u003eto be bolted\/clipped directly to it. It has been designed to replicate a streetlight, in form and function. This is a great board for use in transportation projects and has been designed to fit the same aesthetic as the\u003cspan\u003e \u003c\/span\u003eSTOP:bit, so that they can be used together in the same projects.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote: Micro:bit board not included\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe board also features a\u003cspan\u003e \u003c\/span\u003ephototransistor\u003cspan\u003e \u003c\/span\u003ethat can be used to react to changes in ambient light levels, thus switching on and off the white LED autonomously. For timed switching, the project could include the\u003cspan\u003e \u003c\/span\u003eKitronik RTC board\u003cspan\u003e \u003c\/span\u003efor a different type of autonomy.\u003c\/p\u003e\n\u003cp\u003ePower is supplied to the board from the micro:bit that is connected to it via the 0V and 3V pins.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe LAMP:bit is an accessory for the BBC micro:bit that replicates a street light\u003c\/li\u003e\n\u003cli\u003eIt features a built-in phototransistor for autonomous switching\u003c\/li\u003e\n\u003cli\u003eThe micro:bit can bolt-on\/clip-on to the board\u003c\/li\u003e\n\u003cli\u003eFollows the same aesthetic as the\u003cspan\u003e \u003c\/span\u003eSTOP:bit\n\u003c\/li\u003e\n\u003cli\u003eIt can be used in conjunction with the STOP:bit for larger projects\u003c\/li\u003e\n\u003cli\u003eWe have created custom code blocks for the\u003cspan\u003e \u003c\/span\u003eMakeCode Editor\u003cspan\u003e \u003c\/span\u003ethat are available as an Extension to the editor\u003c\/li\u003e\n\u003cli\u003eThe bottom of the LAMP:bit PCB snaps off to form a stable cross base\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eContains\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 x LAMP:bit for the BBC micro:bit\u003c\/li\u003e\n\u003cli\u003e5 x\u003cspan\u003e \u003c\/span\u003eM3 8mm Countersunk Screws\u003c\/li\u003e\n\u003cli\u003e5 x\u003cspan\u003e \u003c\/span\u003eM3 Hex Full Nut\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHeight: 135mm\u003c\/li\u003e\n\u003cli\u003eWidth: 75mm\u003c\/li\u003e\n\u003cli\u003eBase Width: 42mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRequires\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBBC micro:bit\u003c\/li\u003e\n\u003cli\u003eType-A to Micro-B USB Cable\u003c\/li\u003e\n\u003cli\u003eMakeCode Editor\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eResources\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDatasheet\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Kitronik","offers":[{"title":"Default Title","offer_id":48624101851354,"sku":"ngh1789682753842","price":6.37,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0824\/8318\/3834\/files\/lampbit---street-light-for-bbc-microbit_1.jpg?v=1789682759"},{"product_id":"line-follower-module-for-minibit-robot","title":"Line Follower Module for MiniBit Robot","description":"\u003cp\u003eThis module adds line-following capability to your MiniBit robot!\u003c\/p\u003e\n\u003cp\u003eIt can sense the difference in reflectance between a line (little reflectance) and the background (high reflectance). It is equally at home with black lines on white backgrounds and white lines on black ground.\u003c\/p\u003e\n\u003cp\u003eThe module includes three line follower sensors instead of the usual two, so it's easier to create robust line following code. This module is easily connected to the MiniBit using the 5 screws provided.\u003c\/p\u003e\n\u003cp\u003eWe recommend printing your line from the patterns at\u003cspan\u003e \u003c\/span\u003eRobotSquare. Alternatively you can use black insulation tape or even a black permanent marker (note that some marker pens, even though they are black, can reflect significant infrared light)\u003c\/p\u003e\n\u003cp\u003eThe MiniBit Makecode extension supports this line following module and you can check the current state of each sensor as well as viewing event triggers when any of them change status (eg from \"Line\" to \"No Line\").\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eReady-assembled line follower board\u003c\/li\u003e\n\u003cli\u003e5 x M3 screws 4mm\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"4tronix","offers":[{"title":"Default Title","offer_id":48624106701018,"sku":"hme1789682979954","price":10.72,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0824\/8318\/3834\/files\/line-follower-module-for-minibit-robot_1.jpg?v=1789682985"},{"product_id":"grabber-claw-for-bitbot-xl","title":"Grabber Claw for Bit:Bot XL","description":"\u003cp\u003eThis Grabber Claw (Talon) accessory for the Bit:Bot XL allows you to add a grabbing jaw to your robot using standard servo code in Makecode. 4tronix have also added specific code to the BitBot package to control this Talon directly.\u003c\/p\u003e \u003cp\u003eIncluded are the 3 PCBs that make up the grabber, a metal gear servo and all the screws and pillars you will need. Also included is a spanner widget to help tighten the nyloc nut.\u003c\/p\u003e \u003cp\u003eNo soldering is required - just a number screws to attach.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eResources\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e\u003cspan\u003eAssembly, setup and usage instructions\u003c\/span\u003e\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eImportant notes\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e\u003cspan\u003eWhen using with the Bit:Bot XL, you won't be able to use the ultrasonic breakout\u003c\/span\u003e\u003c\/li\u003e \u003cli\u003e\u003cspan\u003eBit:Bot XL not included\u003c\/span\u003e\u003c\/li\u003e \u003c\/ul\u003e","brand":"4tronix","offers":[{"title":"Default Title","offer_id":48624106766554,"sku":"jlv1789682981207","price":12.77,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0824\/8318\/3834\/files\/grabber-claw-for-bitbot-xl_1.jpg?v=1789682985"},{"product_id":"fireled-5x5-matrix-breakout","title":"FireLED 5x5 Matrix Breakout","description":"\u003cp\u003eThis breakout is designed to fit on Bit:Bot XL, MiniBit and the latest (v1.3) version of Robo:Bit Mk3.\u003c\/p\u003e\n\u003cp\u003eBrighten up your robot, animate its personality and provide handy status indications!\u003c\/p\u003e\n\u003cp\u003eThe FireLED Matrix provides a 5x5 array of FireLEDs giving individual control over the colours of each and every LED. The matrix is easy to code thanks to the Makecode extensions for the robots now including categories for driving these new breakout boards.\u003c\/p\u003e\n\u003cp\u003eWe also stock the OLED and Ultrasonic Distance Sensor breakouts!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote\u003c\/strong\u003e: micro:bit, Bit:Bot XL, MiniBit not included\u003c\/p\u003e","brand":"4tronix","offers":[{"title":"Default Title","offer_id":48624107913434,"sku":"gwl1789682997660","price":9.44,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0824\/8318\/3834\/files\/fireled-5x5-matrix-breakout_1.jpg?v=1789683002"},{"product_id":"128x64-monochrome-oled-breakout","title":"128x64 Monochrome OLED Breakout","description":"\u003cp\u003eThis breakout is designed to fit on BitBot XL, MiniBit and the latest (v1.3) version of RoboBit Mk3.\u003c\/p\u003e\n\u003cp\u003eUse it to add status reports, draw a face or even a line that uses the micro:bit's accelerometer to stay level no matter what angle your robot is at.\u003c\/p\u003e\n\u003cp\u003eThe breakout is easy to code thanks to the Makecode extensions for the robots now including categories for driving these new breakout boards, including both text and simple graphics.\u003c\/p\u003e\n\u003cp\u003eWe also stock the\u003cspan\u003e \u003c\/span\u003eFireLED 5x5 matrix\u003cspan\u003e \u003c\/span\u003eand\u003cspan\u003e Ultrasonic Distance Sensor\u003c\/span\u003e breakouts!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote\u003c\/strong\u003e: micro:bit, BitBot XL, MiniBit not included\u003c\/p\u003e","brand":"4tronix","offers":[{"title":"Default Title","offer_id":48624108077274,"sku":"ipn1789683012834","price":10.18,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0824\/8318\/3834\/files\/128x64-monochrome-oled-breakout_1.jpg?v=1789683016"},{"product_id":"servo-for-microbit","title":"Servo for micro:bit","description":"\u003cp\u003e\u003cspan\u003eThe MonkMakes Servo for micro:bit provides a really easy way to attach up to three servo motors to a BBC micro:bit.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe board requires a power supply or battery pack to provide 5 or 6V to the servomotors. It includes a voltage regulator that will supply 3V back to the micro:bit.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eControl up to three servos\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePolarity protection\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eGPIO over-current protection\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e3.3V regulated output to micro:bit\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eInstructions\u003c\/li\u003e\n\u003cli\u003eDatasheet\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Monk Makes","offers":[{"title":"Default Title","offer_id":48624115253466,"sku":"brb1789683255709","price":8.44,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0824\/8318\/3834\/files\/servo-for-microbit_1.jpg?v=1789683261"},{"product_id":"klip-halo-v20-with-2xaa-battery-holder","title":"Klip Halo V2.0 with 2xAA Battery Holder","description":"\u003cp\u003eThe battery pack version of the Klip Halo V2.0 breaks out each of the 19 GPIO pins from the BBC micro:bit, with easily accessible, clearly marked connection points compatible with both crocodile clips and 4mm banana plugs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote: Compatible with the V1 micro:bit only\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe edge connector allows simple assembly by inserting the BBC micro:bit into the Klip Halo V2.0. A Klip Halo V2.0 JST version is also available which has a JST connector.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis is the V2 model\u003c\/strong\u003e with edge connector. Prefer to screw mount? Check out the V1 model. We also stock a JST version of this V2 board.\u003c\/p\u003e\n\u003cp\u003eThe Klip Halo V2.0 with battery cage has an integrated 2xAA battery holder and an on\/off switch. The switch also turns on \/off the power to the 3V connections. The board has been designed so that the BBC micro:bit can be slotted into the edge connector. No tools are required for installation.\u003c\/p\u003e\n\u003cp\u003eUses for the Klip Halo V2.0 could include attaching external components using crocodile clips, or connecting to electro-fashion products.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote\u003c\/strong\u003e: Not suitable for use with LiPo batteries.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBreaks out the micro:bit's 19 GPIO pins to clearly marked connection points compatible with both crocodile clips and 4mm banana plugs\u003c\/li\u003e\n\u003cli\u003eFeatures an edge connector that the micro:bit inserts into - no assembly required\u003c\/li\u003e\n\u003cli\u003eThe board has an on\/off switch that also turns off power to the 3V connections\u003c\/li\u003e\n\u003cli\u003eDesigned for use with either crocodile clips or conductive thread\u003c\/li\u003e\n\u003cli\u003eOnboard battery cage\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eContents\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Klip Halo V2.0 Board (with battery cage)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLength: 80mm\u003c\/li\u003e\n\u003cli\u003eWidth: 80mm\u003c\/li\u003e\n\u003cli\u003eThickness: 28.3mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRequires\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eA BBC micro:bit\n\u003c\/li\u003e\n\u003cli\u003e2 x AA Batteries\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eResources\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDatasheet\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Kitronik","offers":[{"title":"Default Title","offer_id":48624115319002,"sku":"kwo1789683271794","price":5.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0824\/8318\/3834\/files\/klip-halo-v20-with-2xaa-battery-holder_1.jpg?v=1789683277"},{"product_id":"power-for-microbit","title":"Power for micro:bit","description":"\u003cp\u003eThe MonkMakes Power for micro:bit opens up lots of ways of powering your micro:bit.\u003c\/p\u003e\n\u003cp\u003eThis tiny board has a standard DC barrel jack socket at one end and provides a regulated 3.3V output that you can use to power your micro:bit using the JST battery connector attached to wires coming from the other end of the board.\u003c\/p\u003e\n\u003cp\u003eYou might want to use a MonkMakes Power for micro:bit board if you want to use batteries, an AC\/DC adapter, solar panels or other sources of power that are not the 3V or so that the micro:bit requires.\u003c\/p\u003e\n\u003cp\u003eThe Power for micro:bit will accept an input voltage of 4.5-12V DC from its standard DC barrel jack socket and convert it into a regulated 3.3V for your micro:bit.\u003c\/p\u003e\n\u003cp\u003eThe additional advantages of using a Power for micro:bit instead of a USB 5V power supply are firstly that some USB 5V adaptors can cause problems with the micro:bit (see micro:bit’s safety guidelines), and secondly because the micro:bit’s battery connector is connected directly to the 3V alligator clip-able connector of the micro:bit - so you can supply other things that are connected to the micro:bit with a lot more than the usual 90mA. In fact you can supply up to 200mA (although the regulator will get hot at high currents — see instruction documents below).\u003c\/p\u003e\n\u003cp\u003eThis makes the board great for use with things like NeoPixel strips or servomotors that need a bit more current!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote: Power board only. micro:bit and other pictured cables not included.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eResources\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eInstructions\u003c\/li\u003e\n\u003cli\u003eDatasheet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eInput connector: 2.1mm DC barrel jack connector (positive-centre)\u003c\/li\u003e\n\u003cli\u003eOutput connector: JST-2.0mm on flying leads\u003c\/li\u003e\n\u003cli\u003eVoltage regulator IC: LD1117-3.3V\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Monk Makes","offers":[{"title":"Default Title","offer_id":48624116465882,"sku":"nqz1789683339491","price":8.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0824\/8318\/3834\/files\/power-for-microbit_1.jpg?v=1789683343"},{"product_id":"slider-for-microbit","title":"Slider for micro:bit","description":"\u003cp\u003eThe MonkMakes Slider for micro:bit allows you to interact with your micro:bit by sliding a control left and right.\u003c\/p\u003e \u003cp\u003eThe board uses a 10kΩ linear variable resistor (pot) to output a voltage between 0 and 3V that can be measured in your micro:bit programs using one of the micro:bit connections as an analogue input.\u003c\/p\u003e \u003cp\u003eThe kit includes the Slider for micro:bit itself plus a set of 5 alligator clip leads. Comprehensive instructions with example projects are provided as a free download.\u003c\/p\u003e \u003ch2\u003eResources\u003c\/h2\u003e \u003cul\u003e \u003cli\u003eInstructions\u003c\/li\u003e \u003cli\u003eDatasheet\u003c\/li\u003e \u003c\/ul\u003e","brand":"Monk Makes","offers":[{"title":"Default Title","offer_id":48624117285082,"sku":"tdq1789683384369","price":5.26,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0824\/8318\/3834\/files\/slider-for-microbit_1.jpg?v=1789683389"},{"product_id":"relay-bit-4-channel-3v-relay-board-for-microbit","title":"Relay Bit - 4 Channel 3V Relay Board for micro:bit","description":"\u003cp\u003eThe Relay Bit allows your BBC micro:bit to control low and medium current\/voltage devices. It's a handy option for controlling devices that could not be directly controlled by micro:bit's Digital I\/Os.\u003c\/p\u003e\n\u003cp\u003eThe standardised shield form factor enables a smooth connection with the micro:bit.\u003c\/p\u003e\n\u003cp\u003eThe board includes 4 relays for controlling up to 4 different devices, and includes helpful features such as LED indicators and a 90-degree micro:bit connector.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote\u003c\/strong\u003e: micro:bit board not included.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e4x High-quality 3V relays for loads up to 2A\/24VDC or 2A\/120VAC\u003c\/li\u003e\n\u003cli\u003eControl up to 4 devices\u003c\/li\u003e\n\u003cli\u003e90-degree micro:bit connector\u003c\/li\u003e\n\u003cli\u003eLEDs for each relay status\u003c\/li\u003e\n\u003cli\u003eStandardised shield shape and design\u003c\/li\u003e\n\u003cli\u003eMake your home IoT enabled\u003c\/li\u003e\n\u003cli\u003eMounting holes provided\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eBoard Features\u003c\/h2\u003e\n\u003cp\u003e\u003cimg alt=\"Relay Bit Board Features\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/relay-bit-features.jpg?v=1608246790\u0026amp;width=700\"\u003e\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eChannels: 3\u003c\/li\u003e\n\u003cli\u003eVoltage: 3V\u003c\/li\u003e\n\u003cli\u003eAC control voltage: 120V @ 2A\u003c\/li\u003e\n\u003cli\u003eDC control voltage: 24V @ 2A\u003c\/li\u003e\n\u003cli\u003eDimensions: 7x4.3x1.2cm (approx)\u003c\/li\u003e\n\u003cli\u003eWeight: 100g (approx)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eProduct GitHub page\u003c\/li\u003e\n\u003cli\u003eProduct video with instructions\u003c\/li\u003e\n\u003cli\u003ePinout\n\u003cul\u003e\n\u003cli\u003eRelay 1: P12\u003c\/li\u003e\n\u003cli\u003eRelay 2: P13\u003c\/li\u003e\n\u003cli\u003eRelay 3: P14\u003c\/li\u003e\n\u003cli\u003eRelay 4: P15\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SBC","offers":[{"title":"Default Title","offer_id":48624118530266,"sku":"zro1789683415181","price":14.81,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0824\/8318\/3834\/files\/relay-bit---4-channel-3v-relay-board-for-microbit_1.jpg?v=1789683444"},{"product_id":"klimate-environment-monitoring-board-for-bbc-microbit","title":"Klimate Environment Monitoring Board for BBC micro:bit","description":"\u003cp\u003eThis RTC \u0026amp; Klimate board is a Real-Time Clock (RTC) and environmental sensor (BME280) interface for the BBC micro:bit.\u003c\/p\u003e \u003cp\u003eThe environmental sensor will give the ability to measure temperature, barometric pressure and humidity. The RTC will give the ability to read the current time and date.\u003c\/p\u003e \u003cp\u003eThe board produces a regulated 3V supply that is fed into the edge connector to power the inserted BBC micro:bit, removing the need to power the BBC micro:bit directly. The coin cell holder allows a CR2032 battery to power the real-time clock to continue keeping time whilst there is no mains power being supplied to the board and BBC micro:bit.\u003c\/p\u003e \u003cp\u003ePower to the board can be supplied either via the Terminal blocks or the boards USB connector. \u003cstrong\u003eNote\u003c\/strong\u003e: This USB connector is only for power supply and not for data transfer.\u003c\/p\u003e \u003cp\u003eThe micro:bit RTC also has an expansion port for adding additional I2C devices with a 3V supply (for example, an OLED display), and another for extra ZIP LEDs or ZIP Sticks.\u003c\/p\u003e \u003ch2\u003eMakeCode Blocks\u003c\/h2\u003e \u003cp\u003eKitronik have added custom blocks for the RTC \u0026amp; Klimate board to the Microsoft MakeCode editor.\u003c\/p\u003e \u003cp\u003eThe blocks can be added to the editor by clicking the cog in the top right of the editor. Then select 'Add Package' from the drop-down menu. This will open a dialogue box with a search field, type Kitronik into the search field. This will bring all of our custom block sets, scroll down to the RTC blocks and select them. The blocks will now be added to your menu and can be used in your programs.\u003c\/p\u003e \u003ch2\u003eFeatures\u003c\/h2\u003e \u003cul\u003e \u003cli\u003eAdd Real-Time Clock and environmental sensing capabilities to the BBC micro:bit\u003c\/li\u003e \u003cli\u003eCoincell battery ensures that the RTC \u0026amp; Klimate board continues to keep time when the board is not connected to a power source\u003c\/li\u003e \u003cli\u003eFeatures an expansion port for 3v I2C devices, such as an OLED display or ZIP LEDs\u003c\/li\u003e \u003cli\u003eWrite code using the MakeCode Editor\u003c\/li\u003e \u003cli\u003eCode with ease, courtesy of the custom blocks that have added to the MakeCode Editor\u003c\/li\u003e \u003cli\u003eWhen the RTC \u0026amp; Klimate board is powered, it will also power the inserted micro:bit\u003c\/li\u003e \u003c\/ul\u003e \u003ch2\u003ePackage Contents\u003c\/h2\u003e \u003cul\u003e \u003cli\u003e1 x Kitronik RTC \u0026amp; Klimate Board.\u003c\/li\u003e \u003c\/ul\u003e \u003ch2\u003eRequires\u003c\/h2\u003e \u003cul\u003e \u003cli\u003e1x BBC micro:bit V1 or V2\u003cbr\u003e1 x CR2032 battery\n\u003c\/li\u003e \u003c\/ul\u003e \u003ch2\u003eResources\u003c\/h2\u003e \u003cul\u003e \u003cli\u003eDatasheet\u003c\/li\u003e \u003cli\u003eThe Microsoft MakeCode Editor\u003c\/li\u003e \u003c\/ul\u003e \u003ch2\u003eDimensions\u003c\/h2\u003e \u003cul\u003e \u003cli\u003eLength: 67.5mm\u003c\/li\u003e \u003cli\u003eWidth: 62mm\u003c\/li\u003e \u003cli\u003eHeight (without micro:bit): 17.6mm\u003c\/li\u003e \u003c\/ul\u003e","brand":"Kitronik","offers":[{"title":"Default Title","offer_id":48624118563034,"sku":"byn1789683440255","price":16.44,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0824\/8318\/3834\/files\/klimate-environment-monitoring-board-for-bbc-microbit_1.jpg?v=1789683445"},{"product_id":"smart-greenhouse-kit-for-the-bbc-microbit","title":"Smart Greenhouse Kit for the BBC micro:bit","description":"\u003cp\u003eUnlock the secrets of nature with code, engineering, and the Kitronik Smart Greenhouse Kit for BBC micro:bit!\u003c\/p\u003e\n\u003cp\u003eThe Kitronik Smart Greenhouse Kit for the BBC micro:bit provides an exciting way to learn about the relationship between plants and their environment. The user will learn how to monitor environmental conditions and then how to build automated systems that react to them. Grow a crop of plants with this smart greenhouse that can be coded to monitor and automatically water them so that you can get them growing perfectly.\u003c\/p\u003e\n\u003cp\u003eThe kit comprises a two-part plastic greenhouse, Kitronik environmental control board, water pump, Kitronik ZIP Stick, and Mini Prong soils moisture sensor. Also included are 5 crocodile clips, ZIP extension cable and a small screwdriver. Just add a micro:bit, seeds, and then some water and you will have everything you need!\u003c\/p\u003e\n\u003cp\u003eThe kit also ships with detailed assembly and coding instructions that will get you up and cultivating in no time. There are also 7 online MakeCode tutorials that build in complexity as you progress through them. They cover everything from gathering sensor data and having the system automatically react to it, to visual user interfaces and more. It is recommended that the user\/student complete the tutorials in order for the best learning experience.\u003c\/p\u003e\n\u003cp\u003eAt the heart of the micro:bit controlled Kitronik Smart Greenhouse Kit is the Kitronik environmental control board. This board provides a variety of sensor inputs and connection points for the BBC micro:bit (V1 \u0026amp; V2) and provides the ability to control outputs for devices such as a water pump, fan, servo or heater pad. This makes it ideal for feedback control systems, such as the smart greenhouse kit.\u003c\/p\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003cimg style=\"float: none;\" alt=\"Micro:bit environmental control board\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/5697_description-1-kitronik-environmental-board--microbit-callout_1.jpg?v=1610025961\u0026amp;width=700\"\u003e\u003c\/div\u003e\n\u003cp\u003eThe environmental control board can be coded with the MakeCode editor and Kitronik have produced a set of custom blocks to make the job as simple as possible. There are blocks for reading input and for controlling additional devices such as a pump. This can be added via the add Extensions function in the editor by searching “Kitronik” or from https:\/\/github.com\/KitronikLtd\/pxt-kitronik-smart-greenhouse.\u003c\/p\u003e\n\u003cp\u003eThe default crop for these types of experiments is often cress, as it is quick growing, requires little tending, and can be harvested when they are approximately 5cm tall (within a few days). Cress is also practically a superfood, this alone could easily become the subject of an entire lesson. Despite all of its benefits, cress is not the only option. There are other sprouting plants, such as sprouting white mustard, which also grows quickly and can be harvested when they are 5cm tall. You can also look into micro-herbs\/micro-greens, these too are usually ready to harvest within a week and offer an excellent and aromatic alternative. Once you have chosen your preferred crop type you then need to choose a suitable soil.\u003c\/p\u003e\n\u003ch2\u003eNote\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eThis kit does not come with a BBC micro:bit\u003c\/li\u003e\n\u003cli\u003eThis kit is compatible with both the micro:bit V1 and the new micro:bit V2\u003c\/li\u003e\n\u003cli\u003eThis kit is not waterproof. If you get the board wet, please turn off and allow to fully dry. Risk of shock is very small, but please be cautious\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/5699_description-3-kitronik-greenhouse-kit-microbit-callout.jpg?v=1610026032\u0026amp;width=700\" alt=\"microbit greenhouse kit\" style=\"float: none;\"\u003e\u003c\/div\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBuild automated growing systems that react to changeable environmental conditions with the Kitronik Greenhouse Kit\u003c\/li\u003e\n\u003cli\u003eThis kit is compatible with both micro:bit V1 and micro:bit V2\u003c\/li\u003e\n\u003cli\u003eThe kit comes with detailed assembly and coding instructions\u003c\/li\u003e\n\u003cli\u003eAt the heart of the kit is the kitronik Environmental control board that was specifically designed to be the control hub for this kit\u003c\/li\u003e\n\u003cli\u003eKey features of the Environmental control board are:\n\u003cul\u003e\n\u003cli\u003eThe board features a number of sensor inputs that can be coded to control the board's outputs\u003c\/li\u003e\n\u003cli\u003eThere is an onboard BME 280 environmental temperature, barometric pressure and humidity sensor and a separate Real-Time Clock (RTC)\u003c\/li\u003e\n\u003cli\u003eThe board also features an onboard piezo buzzer, 2 1A outputs (ideal for a water pump, heater pads or fan), 3 status ZIP LEDs, a ZIP LED expansion\u003c\/li\u003e\n\u003cli\u003econnector and servo output. In addition to these, 3 BBC micro:bit pins are broken out to croc-clip connections as further inputs and outputs, along with pads for 3V and GND\u003c\/li\u003e\n\u003cli\u003eIt can be powered via the onboard 3xAA battery holder or the 2.1mm DC Jack, and the power controlled via the on\/off switch with an adjacent LED indicator. Can also be powered by the matching Solar Cell Kit!\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eThere are also 7 online MakeCode tutorials that introduce you to all of the features of the board\u003c\/li\u003e\n\u003cli\u003eCrops such as cress, sprouting white mustard and micro-herbs\/micro-greens are ideal for use with this kit\u003c\/li\u003e\n\u003cli\u003eCode it with the MakeCode editor using the Kitronik custom code blocks for the Environmental control board\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eContents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e2 x Moulded plastic greenhouse enclosure parts\u003c\/li\u003e\n\u003cli\u003e1 x Kitronik Environmental Control Board for micro:bit\u003c\/li\u003e\n\u003cli\u003e1 x Water Pump\u003c\/li\u003e\n\u003cli\u003e1 x Kitronik ZIP Stick\u003c\/li\u003e\n\u003cli\u003e1 x Mini Prong Moisture Sensor\u003c\/li\u003e\n\u003cli\u003e5 x Crocodile Leads\u003c\/li\u003e\n\u003cli\u003e1 x ZIP extension cable\u003c\/li\u003e\n\u003cli\u003e1 x Screwdriver\u003c\/li\u003e\n\u003cli\u003eUser guide Booklet, containing assembly and coding instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eRequires\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eA web browser and an internet connection\u003c\/li\u003e\n\u003cli\u003eOne of the following:\n\u003cul\u003e\n\u003cli\u003eA BBC micro:bit V1 or BBC micro:bit V2\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n3 x AA Batteries or plug-in power supply with USB to DC Jack\n\u003c\/li\u003e\n\u003cli\u003eSeeds, such as cress\u003c\/li\u003e\n\u003cli\u003eSoil\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptional\u003c\/strong\u003e: Solar Cell Kit\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eEnvironmental Control Board Datasheet\u003c\/li\u003e\n\u003cli\u003eSeven online MakeCode tutorials for the Kitronik Smart Greenhouse Kit:\n\u003cul\u003e\n\u003cli\u003eA - Visual Thermometer\u003c\/li\u003e\n\u003cli\u003eB - ZIP LED hue\u003c\/li\u003e\n\u003cli\u003eC - Auto-watering\u003c\/li\u003e\n\u003cli\u003eD - Growlight\u003c\/li\u003e\n\u003cli\u003eE - Timed watering\u003c\/li\u003e\n\u003cli\u003eF - Water level sensing\u003c\/li\u003e\n\u003cli\u003eG - Datalogging\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eAdding a Solar Panel to the Kitronik Smart Greenhouse\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Kitronik","offers":[{"title":"Default Title","offer_id":48624119808218,"sku":"ckm1789683492041","price":47.22,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0824\/8318\/3834\/files\/smart-greenhouse-kit-for-the-bbc-microbit_1.jpg?v=1789683497"},{"product_id":"environmental-control-board-for-bbc-microbit","title":"Environmental Control Board for BBC micro:bit","description":"\u003cp\u003eThe Kitronik environmental control board provides a variety of sensor inputs and connection points for the BBC micro:bit (V1 \u0026amp; V2) and provides the ability to control outputs for devices such as a water pump, fan, servo or heater pad. This makes it ideal for feedback control systems. This board is also supplied as part of the Kitronik Smart Greenhouse Kit.\u003c\/p\u003e\n\u003cp\u003eThe BBC micro:bit slots directly into the board via an integrated edge connector. The micro:bit can then read input from the onboard BME 280 environmental temperature, barometric pressure and humidity sensor and also the Real-Time Clock. There is an onboard piezo buzzer, 2 x 1A outputs (ideal for a water pump, heater pads or fan), 3 status ZIP LEDs, a ZIP LED expansion connector and servo output. In addition to these, 3 BBC micro:bit pins are broken out to croc-clip connections as further inputs and outputs, along with pads for 3V and GND.\u003c\/p\u003e\n\u003cp\u003ePower is provided via the onboard 3xAA battery holder or the 2.1mm DC Jack. There is an on\/off switch for controlling power supply to the board and there is a green LED to indicate when the board has been turned on. The board also produces a regulated 3V supply which is fed into the edge connector to power the inserted BBC micro:bit, removing the need to power the BBC micro:bit separately.\u003c\/p\u003e\n\u003cp\u003eThe board also features a solar cell input and will charge rechargeable batteries if inserted into the onboard battery holder. Renewable energy is becoming increasingly important and this board can be used to help illustrate greener ways of delivering desired outcomes.\u003c\/p\u003e\n\u003cp\u003eThe environmental control board can be coded with the MakeCode editor and Kitronik have produced a set of custom blocks to make the job as simple as possible. There are blocks for reading input and for controlling additional devices such as a pump. This can be added via the add Extensions function in the editor by searching “Kitronik” or from https:\/\/github.com\/KitronikLtd\/pxt-kitronik-smart-greenhouse. The supplied datasheet has detailed coding advice, so much so that the beginner will have no difficulties following along.\u003c\/p\u003e\n\u003cp\u003eThe board can be coded without using our custom blocks in the MakeCode Blocks, Javascript, and Python workspaces. Coding for some of the board's features, e.g. I2C, requires an in-depth knowledge making it mainly suitable for the more advanced user.\u003c\/p\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003cimg style=\"float: none;\" alt=\"Micro:bit environmental control board\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/5697_description-1-kitronik-environmental-board--microbit-callout_1.jpg?v=1610025961\u0026amp;width=700\"\u003e\u003c\/div\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBuild automated systems that react to environmental changes, such as plant watering and greenhouse systems\u003c\/li\u003e\n\u003cli\u003eIt is compatible with both micro:bit V1 and microbit V2\n\u003c\/li\u003e\n\u003cli\u003eThe board features a number of sensor inputs that can be coded to control the board's outputs\u003c\/li\u003e\n\u003cli\u003eThere is an onboard BME 280 environmental temperature, barometric pressure and humidity sensor and a separate Real-Time Clock (RTC)\u003c\/li\u003e\n\u003cli\u003eThe board also features an onboard piezo buzzer, 2 x 1A outputs (ideal for a water pump, heater pads or fan), 3 status ZIP LEDs, a ZIP LED expansion connector and servo output. In addition to these, 3 BBC micro:bit pins are broken out to croc-clip connections as further inputs and outputs, along with pads for 3V and GND\u003c\/li\u003e\n\u003cli\u003eIt can be powered via the onboard 3xAA battery holder or the 2.1mm DC Jack, and the power controlled via the on\/off switch with an adjacent LED indicator\u003c\/li\u003e\n\u003cli\u003eThere is also a solar-cell input that can be used in conjunction with rechargeable batteries\u003c\/li\u003e\n\u003cli\u003eThe board produces a regulated 3V supply for powering the micro:bit via its edge connector i\/o connections\u003c\/li\u003e\n\u003cli\u003eCode it with MakeCode. Kitronik has produced custom blocks to make the job of coding the board as simple as possible, opening up activities for younger students\u003c\/li\u003e\n\u003cli\u003eThese custom blocks are optional, the board can be coded without them in the Blocks, JavaScript and Python editors. Opening up activities for those that require more of a challenge\u003c\/li\u003e\n\u003cli\u003eThis board is also available as part of the Kitronik Smart Greenhouse Kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eContents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Environmental board for greenhouse kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eDimensions\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eLength: 74.5mm\u003c\/li\u003e\n\u003cli\u003eWidth: 66mm\u003c\/li\u003e\n\u003cli\u003eHeight: 29mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eRequires\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eA BBC micro:bit V1 or microbit V2\n\u003c\/li\u003e\n\u003cli\u003e\n3 x AA Batteries or plug-in power supply with USB to DC Jack\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDatasheet\u003c\/li\u003e\n\u003cli\u003eSeven online MakeCode tutorials for the Kitronik Smart Greenhouse Kit:\n\u003cul\u003e\n\u003cli\u003eA - Visual Thermometer\u003c\/li\u003e\n\u003cli\u003eB - ZIP LED hue\u003c\/li\u003e\n\u003cli\u003eC - Auto-watering\u003c\/li\u003e\n\u003cli\u003eD - Growlight\u003c\/li\u003e\n\u003cli\u003eE - Timed watering\u003c\/li\u003e\n\u003cli\u003eF - Water level sensing\u003c\/li\u003e\n\u003cli\u003eG - Datalogging\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eAdding a Solar Panel to the Kitronik Smart Greenhouse.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Kitronik","offers":[{"title":"Default Title","offer_id":48624119939290,"sku":"qoi1789683497883","price":23.65,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0824\/8318\/3834\/files\/environmental-control-board-for-bbc-microbit_1.jpg?v=1789683502"},{"product_id":"18-colour-display-module-for-microbit-160x128","title":"1.8\" Colour Display Module for micro:bit (160x128)","description":"\u003cp\u003eThis is a colourful display module designed for the BBC micro:bit, giving you a whole new way to make projects. The display is 1.8\" with a 160x128 pixel resolution capable of displaying 65k colours.\u003c\/p\u003e \u003cp\u003eThe easy to use dedicated MakeCode package for this display makes it easy to start experimenting with colours, objects, shapes, strings and more, using the drag and drop elements. Examples of this can be seen on the Wiki page for this display.\u003c\/p\u003e \u003cp\u003ePlug your micro:bit into the display connector and you're ready to go!\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNote: micro:bit and cable not included.\u003c\/strong\u003e\u003c\/p\u003e \u003ch2\u003eFeatures\u003c\/h2\u003e \u003cul\u003e \u003cli\u003emicro:bit edge connector - directly pluggable\u003c\/li\u003e \u003cli\u003eEmbedded ST7735S driver\u003c\/li\u003e \u003cli\u003eSupports 65K colours\u003c\/li\u003e \u003cli\u003eOnboard SRAM 23LC1024 used as display cache\u003c\/li\u003e \u003cli\u003eSPI interface - uses only a few IO pins\u003c\/li\u003e \u003cli\u003eBacklight adjustment via PWM\u003c\/li\u003e \u003cli\u003eReserved solder pads for control interface makes it easy to connect with Arduino boards\u003c\/li\u003e \u003cli\u003eComes with online development resources (micro:bit graphical demo\/user manual)\u003c\/li\u003e \u003c\/ul\u003e \u003ch2\u003ePackage Contents\u003c\/h2\u003e \u003cul\u003e \u003cli\u003e1x 1.8\" LCD for micro:bit\u003c\/li\u003e \u003c\/ul\u003e \u003ch2\u003eResources\u003c\/h2\u003e \u003cul\u003e \u003cli\u003eProduct Wiki and usage examples\u003c\/li\u003e \u003c\/ul\u003e \u003ch2\u003eSpecifications\u003c\/h2\u003e \u003cul\u003e \u003cli\u003eDriver: ST7735S\u003c\/li\u003e \u003cli\u003eResolution: 160x128\u003c\/li\u003e \u003cli\u003eDisplay colour: RGB, 65K colours\u003c\/li\u003e \u003cli\u003eOperating voltage: 3.3V\u003c\/li\u003e \u003cli\u003eDimension: 61mm x 51.5mm\u003c\/li\u003e \u003c\/ul\u003e \u003ch2\u003ePinout\u003c\/h2\u003e \u003ctable class=\"tabSty-1\" border=\"1\" style=\"border-style: solid; height: 265px;\" width=\"680\"\u003e \u003ctbody\u003e \u003ctr style=\"height: 18px;\"\u003e \u003cth style=\"height: 18px; width: 115px;\"\u003ePin\u003c\/th\u003e \u003cth style=\"height: 18px; width: 160px;\"\u003emicro:bit Pin\u003c\/th\u003e \u003cth style=\"height: 18px; width: 383px;\"\u003eDescription\u003c\/th\u003e \u003c\/tr\u003e \u003ctr style=\"height: 18px;\"\u003e \u003ctd style=\"height: 18px; width: 115px;\"\u003e3V3\u003c\/td\u003e \u003ctd style=\"height: 18px; width: 160px;\"\u003e3V3\u003c\/td\u003e \u003ctd style=\"height: 18px; width: 383px;\"\u003ePower\u003c\/td\u003e \u003c\/tr\u003e \u003ctr style=\"height: 18px;\"\u003e \u003ctd style=\"height: 18px; width: 115px;\"\u003eGND\u003c\/td\u003e \u003ctd style=\"height: 18px; width: 160px;\"\u003eGND\u003c\/td\u003e \u003ctd style=\"height: 18px; width: 383px;\"\u003eGround\u003c\/td\u003e \u003c\/tr\u003e \u003ctr style=\"height: 18px;\"\u003e \u003ctd style=\"height: 18px; width: 115px;\"\u003eMISO\u003c\/td\u003e \u003ctd style=\"height: 18px; width: 160px;\"\u003eP14\u003c\/td\u003e \u003ctd style=\"height: 18px; width: 383px;\"\u003eSPI data master input\/slave output\u003c\/td\u003e \u003c\/tr\u003e \u003ctr style=\"height: 18px;\"\u003e \u003ctd style=\"height: 18px; width: 115px;\"\u003eMOSI\u003c\/td\u003e \u003ctd style=\"height: 18px; width: 160px;\"\u003eP15\u003c\/td\u003e \u003ctd style=\"height: 18px; width: 383px;\"\u003eSPI data master output\/slave input\u003c\/td\u003e \u003c\/tr\u003e \u003ctr style=\"height: 18px;\"\u003e \u003ctd style=\"height: 18px; width: 115px;\"\u003eSCK\u003c\/td\u003e \u003ctd style=\"height: 18px; width: 160px;\"\u003eP13\u003c\/td\u003e \u003ctd style=\"height: 18px; width: 383px;\"\u003eSPI clock input\u003c\/td\u003e \u003c\/tr\u003e \u003ctr style=\"height: 18px;\"\u003e \u003ctd style=\"height: 18px; width: 115px;\"\u003eLCD_CS\u003c\/td\u003e \u003ctd style=\"height: 18px; width: 160px;\"\u003eP16\u003c\/td\u003e \u003ctd style=\"height: 18px; width: 383px;\"\u003eLCD chip selection\u003c\/td\u003e \u003c\/tr\u003e \u003ctr style=\"height: 18px;\"\u003e \u003ctd style=\"height: 18px; width: 115px;\"\u003eRAM_CS\u003c\/td\u003e \u003ctd style=\"height: 18px; width: 160px;\"\u003eP2\u003c\/td\u003e \u003ctd style=\"height: 18px; width: 383px;\"\u003eSRAM chip selection\u003c\/td\u003e \u003c\/tr\u003e \u003ctr style=\"height: 18px;\"\u003e \u003ctd style=\"height: 18px; width: 115px;\"\u003eDC\u003c\/td\u003e \u003ctd style=\"height: 18px; width: 160px;\"\u003eP12\u003c\/td\u003e \u003ctd style=\"height: 18px; width: 383px;\"\u003eLCD data\/command\u003c\/td\u003e \u003c\/tr\u003e \u003ctr style=\"height: 18px;\"\u003e \u003ctd style=\"height: 18px; width: 115px;\"\u003eRST\u003c\/td\u003e \u003ctd style=\"height: 18px; width: 160px;\"\u003eP8\u003c\/td\u003e \u003ctd style=\"height: 18px; width: 383px;\"\u003eLCD reset\u003c\/td\u003e \u003c\/tr\u003e \u003ctr style=\"height: 18px;\"\u003e \u003ctd style=\"height: 18px; width: 115px;\"\u003eBL\u003c\/td\u003e \u003ctd style=\"height: 18px; width: 160px;\"\u003eP1\u003c\/td\u003e \u003ctd style=\"height: 18px; width: 383px;\"\u003eLCD backlight\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e","brand":"Waveshare","offers":[{"title":"Default Title","offer_id":48624125247706,"sku":"sgl1789683657042","price":16.56,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0824\/8318\/3834\/files\/18-colour-display-module-for-microbit-160x128_1.jpg?v=1789683662"},{"product_id":"microdriver-driver-expansion-board-for-microbit","title":"micro:Driver - Driver Expansion Board for micro:bit","description":"\u003cdiv class=\"desc\"\u003e\n\u003cdiv class=\"desCon\"\u003eSince the advent of micro:bit, its simple and practical way of programming is widely loved by makers, students and teachers. Its sample design, coupled with a wealth of pin resources, give it infinite possibilities. This expansion board not only leads to 9 micro:bit onboard GPIO interfaces, but also comes with 4-way motor drives and 8 servo interfaces, of which 4-way motor drives can be reused as 2-way stepper motor drives.\u003cbr\u003e\u003cbr\u003e Micro:bit Driver Expansion Board adopts I2C external drive chip to control the motor and servo motor, only takes up two I2C pins and can complete the motor and servo dual control without occupying other resources. Using HR8833 motor driver, the maximum continuous operating current is 1.5A, it can drive the ordinary small motor and N20 mini metal motor. Each motor port comes with a positive and negative rotating indicator to identify the motor running direction conveniently, which is very suitable for students and makers to make small projects. Both the extended GPIO and the servo interface use the DFRobot-Gravity standard interface, supporting a large number of modules and sensors. The servo interface is directly connected to the Vin power supply, thus increasing the supply current which can support multiple servos to work at the same time.\u003cbr\u003e\u003cbr\u003e This expansion board supports 3.5V to 5.5V power supply. It provides a DC 2.1 plug and a wiring terminal which can be connected directly to three dry battery boxes. It comes with a USB to DC 2.1 adapter cable, which can be powered by power bank and is more economical and environment-friendly.\u003cbr\u003e\n\u003cdiv style=\"display: block;\" id=\"div2\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cdiv class=\"desCon\"\u003e\n\u003cli\u003eDigital Output Voltage: 0V \/ 3.3V\u003c\/li\u003e\n\u003cli\u003eAnalog Output Voltage: 0~3.3V DC\u003c\/li\u003e\n\u003cli\u003eStandard Gravity Interface\u003c\/li\u003e\n\u003cli\u003eMicro: bit Interface: 9 (P0 P1 P2 P8 P12 P13 P14 P15 P16)\u003c\/li\u003e\n\u003cli\u003eServo Interfaces x 8\u003c\/li\u003e\n\u003cli\u003eMotor Interface: DC Motor x 4 \/ Step Motor x 2\u003c\/li\u003e\n\u003cli\u003eDimension: 63 x 58mm\u003c\/li\u003e\n\u003c\/div\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cdiv class=\"desCon\"\u003e\n\u003cli\u003eProduct wiki\u003c\/li\u003e\n\u003cli\u003eMore Documents\u003c\/li\u003e\n\u003c\/div\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cdiv class=\"desCon\"\u003e\n\u003cli\u003e1x Micro:bit Driver Expansion Board\u003c\/li\u003e\n\u003cli\u003e1x USB to DC2.1 converter cable\u003c\/li\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"DFRobot","offers":[{"title":"Default Title","offer_id":48624126427354,"sku":"lhp1789683711647","price":10.08,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0824\/8318\/3834\/files\/microdriver---driver-expansion-board-for-microbit_1.jpg?v=1789683715"},{"product_id":"compact-all-in-one-robotics-board-for-bbc-microbit","title":"Compact All-In-One Robotics Board for BBC micro:bit","description":"\u003cp\u003eWith the Kitronik Compact Robotics Board, the BBC micro:bit can be used to drive 4 motors (or 2 stepper motors) and 8 servos.\u003c\/p\u003e \u003cp\u003eCoupled with 17 other I\/O expansion points, this means the BBC micro:bit can very easily become the core of a whole variety of robotics projects. The board is small on footprint but big on features and connectivity.\u003c\/p\u003e \u003cp\u003eThe Robotics Board features 2 Dual H Bridge Motor Driver ICs (capable of driving 2 standard motors or 1 stepper motor each) and 8 servo outputs (capable of driving standard and continuous rotation servos), all controlled from the BBC micro:bit using the I2C protocol via a 16 channel driver IC. Our custom MakeCode blocks make using I2C easy, even for novice users.\u003c\/p\u003e \u003cp\u003eThe Link header breaks out all the usable pins from the BBC micro:bit, and is designed to allow 2.54mm pitch pin header to be easily soldered into place. The 17 available I\/O pins allow other input devices, for example, sensors, or output devices, such as ZIP LEDs, to be added to the board. The I2C communication lines are also broken out (Pins 19 \u0026amp; 20), which means other I2C compatible devices can also be added to the board and controlled by the BBC micro:bit.\u003c\/p\u003e \u003cp\u003ePower is provided via either a terminal block or servo style connector. The supply is then controlled by an on\/off power switch to the board. There is also a green LED to indicate when the board is turned on. The board then produces a regulated 3.3V supply which is fed into the 3V and GND connections to power the connected BBC micro:bit. This removes the need to power the BBC micro:bit separately. The 3V and GND pins are also broken out on the Link header, which means external devices can also be powered.\u003c\/p\u003e \u003cp\u003eTo use the compact robotics board, the BBC micro:bit should be inserted firmly into the edge connector, with the LEDs and buttons visible from the front.\u003c\/p\u003e \u003cp\u003eKitronik has produced a set of custom blocks for the MakeCode editor to simplify using the Compact Robotics Board for BBC micro:bit. To add them to the editor, select the cog icon in the top right of the editor. Then, select Extensions from the drop-down menu and in the search bar type and enter Kitronik. Pick the Kitronik robotics Board from the list and the new blocks will be added to the menu in the editor.\u003c\/p\u003e \u003ch2\u003eFeatures\u003c\/h2\u003e \u003cul\u003e \u003cli\u003eA compact yet feature-packed board designed to sit at the heart of your robotics project.\u003c\/li\u003e \u003cli\u003eIt can drive 4 motors (or 2 stepper motors) and 8 servos.\u003c\/li\u003e \u003cli\u003eThe board also has 17 other I\/O expansion points.\u003c\/li\u003e \u003cli\u003eThe link header is designed to allow 2.54mm pitch pin header to be used.\u003c\/li\u003e \u003cli\u003eThe I2C communication lines are also broken out allowing other I2C compatible devices to be controlled.\u003c\/li\u003e \u003cli\u003eThis board also features an on\/off switch and power status LED.\u003c\/li\u003e \u003cli\u003ePower the board via either a terminal block or servo style connector.\u003c\/li\u003e \u003cli\u003eThe 3V and GND pins are also broken out on the Link header, allowing external devices to be powered.\u003c\/li\u003e \u003cli\u003eCode with the Microsoft MakeCode editor with custom blocks by Kitronik or with Python.\u003c\/li\u003e \u003c\/ul\u003e \u003ch2\u003eContents\u003c\/h2\u003e \u003cul\u003e \u003cli\u003e1 x Compact Robotics Board for BBC micro:bit\u003c\/li\u003e \u003c\/ul\u003e \u003cul\u003e\u003c\/ul\u003e \u003ch2\u003eRequires\u003c\/h2\u003e \u003cul\u003e \u003cli\u003eA micro:bit\u003c\/li\u003e \u003cli\u003eUSB Cable\u003c\/li\u003e \u003cli\u003ePower Supply\u003c\/li\u003e \u003cli\u003e\nMotor \/ Stepper motor\n\u003c\/li\u003e \u003cli\u003eServos\u003c\/li\u003e \u003c\/ul\u003e \u003ch2\u003eResources\u003c\/h2\u003e \u003cul\u003e \u003cli\u003eDatasheet\u003c\/li\u003e \u003cli\u003eDatenblatt - Deutsche Übersetzung\u003c\/li\u003e \u003cli\u003eDemo Code for programming in MicroPython is available from GitHub\n\u003c\/li\u003e \u003c\/ul\u003e \u003ch2\u003eDimensions\u003c\/h2\u003e \u003cul\u003e \u003cli\u003eLength: 68mm\u003c\/li\u003e \u003cli\u003eWidth: 46.5mm\u003c\/li\u003e \u003cli\u003eHeight: 10.6mm\u003c\/li\u003e \u003cli\u003ePCB Thickness: 1.6mm\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e micro:bit, motors, battery holder, batteries and robotics parts not included\u003c\/p\u003e","brand":"Kitronik","offers":[{"title":"Default Title","offer_id":48624127541466,"sku":"nzi1789683765501","price":17.23,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0824\/8318\/3834\/files\/compact-all-in-one-robotics-board-for-bbc-microbit_1.jpg?v=1789683770"},{"product_id":"compact-16-servo-driver-board-for-the-bbc-microbit","title":"Compact 16 Servo Driver Board for the BBC micro:bit","description":"\u003cp\u003eTake your robotics project to the next level with the Kitronik compact 16 servo driver board for the BBC micro:bit. This board allows up to 16 Remote Control (RC) servos to be driven simultaneously. It is based on the PCA9865 driver IC.\u003c\/p\u003e \u003cp\u003eThe board includes an integrated Edge Connector for the BBC micro:bit . Expansion Pads allow the connection of this board with other compatible micro:bit accessory boards using the “Link” pluggable pin header.\u003c\/p\u003e \u003cp\u003ePower is provided via either a terminal block or servo style connector. The supply is then controlled by an on\/off power switch to the board. There is also a green LED to indicate when the board is turned on. The board then produces a regulated 3.3V supply which is fed into the 3V and GND connections to power the connected BBC micro:bit. This removes the need to power the BBC micro:bit separately. The 3V and GND pins are also broken out on the Link header, which means external devices can also be powered.\u003c\/p\u003e \u003cp\u003eKitronik has produced a set of custom blocks for the MakeCode editor to simplify using the Compact 16 servo control board for BBC micro:bit. To add them to the editor, select the cog icon in the top right of the editor. Then, select Extensions from the drop-down menu and in the search bar type and enter Kitronik. Pick the Kitronik I2C-16-servo tile from the list and the new blocks will be added to the menu in the editor.\u003c\/p\u003e \u003ch2\u003eFeatures\u003c\/h2\u003e \u003cul\u003e \u003cli\u003eDrive up to 16 servo motors\u003c\/li\u003e \u003cli\u003eServos take power directly from the board power supply\u003c\/li\u003e \u003cli\u003eStandard 0.1\" pitch servo connectors\u003c\/li\u003e \u003cli\u003eLink Standard compatible\u003c\/li\u003e \u003cli\u003eThis board also features an on\/off switch and power status LED\u003c\/li\u003e \u003cli\u003eIncludes fitted Edge Connector for the BBC micro:bit to slot into\u003c\/li\u003e \u003cli\u003ePower the board via either a terminal block or servo style connector\u003c\/li\u003e \u003cli\u003eThe 3V and GND pins are also broken out on the Link header, allowing external devices to be powered\u003c\/li\u003e \u003cli\u003eCode with the Microsoft MakeCode editor with custom blocks by Kitronik or with Python\u003c\/li\u003e \u003c\/ul\u003e \u003ch2\u003eContents\u003c\/h2\u003e \u003cul\u003e \u003cli\u003e1 x Compact 16 Servo Driver Board for the BBC micro:bit.\u003c\/li\u003e \u003c\/ul\u003e \u003ch2\u003eRequires\u003c\/h2\u003e \u003cul\u003e \u003cli\u003eA micro:bit\u003c\/li\u003e \u003cli\u003eUSB Cable\u003c\/li\u003e \u003cli\u003ePower Supply\u003c\/li\u003e \u003cli\u003eServos\u003c\/li\u003e \u003c\/ul\u003e \u003ch2\u003eResources\u003c\/h2\u003e \u003cul\u003e \u003cli\u003eDatasheet\u003c\/li\u003e \u003cli\u003eDemo Code for programming in MicroPython is available from GitHub\n\u003c\/li\u003e \u003c\/ul\u003e \u003ch2\u003eDimensions\u003c\/h2\u003e \u003cul\u003e \u003cli\u003eLength: 68mm\u003c\/li\u003e \u003cli\u003eWidth: 46.5mm\u003c\/li\u003e \u003cli\u003eHeight: 10.6mm\u003c\/li\u003e \u003cli\u003ePCB Thickness: 1.6mm\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eNote\u003c\/strong\u003e: micro:bit, servos, battery holder and batteries \u003cstrong\u003enot included\u003c\/strong\u003e\u003c\/p\u003e","brand":"Kitronik","offers":[{"title":"Default Title","offer_id":48624127967450,"sku":"icc1789683783858","price":12.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0824\/8318\/3834\/files\/compact-16-servo-driver-board-for-the-bbc-microbit_1.jpg?v=1789683789"},{"product_id":"misound-speaker-board-for-bbc-microbit-v2","title":"MI:sound Speaker Board for BBC micro:bit V2","description":"\u003cp\u003eThe MI:sound board is a speaker board for the BBC micro:bit. It features an on-board speaker, CR2032 battery holder, thumbwheel volume control and an easy access on\/off switch. The MI:sound board can either be powered by the CR2032 battery (provided) or via the micro:bit USB or JST connections. It has been designed to work with micro:bit V1 and micro:bit V2.\u003c\/p\u003e\n\u003cp\u003eThe speaker on MI:sound can be used in conjunction with the micro:bits onboard speaker or instead of. The micro:bit speaker can be turned off as there is a command\/block for that in the MakeCode editor. Why would you want to? Volume! MI:sound's speaker is loud, and the potentiometer gives you control over its volume without the need to head back into the code. Super convenient!\u003c\/p\u003e\n\u003cp\u003eTo use the MI:sound speaker board, the BBC micro:bit should be attached using the supplied bolts, spacers and nuts. Only Pin 0, 3V and GND need to be connected. Crocodile clips can also be used.\u003c\/p\u003e\n\u003cp\u003eWhen assembled, the MI:sound board is connected directly to the 3V, GND and P0 connections on the micro:bit. The 3V and GND connections provide power to the micro:bit and the built-in buzzer is connected to P0, which is the default output pin when using the audio functions in the MakeCode software. The board has an easy to access on\/off switch, which makes it easy to turn a project on and off.\u003c\/p\u003e\n\u0026lt;\u0026gt;\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003eLithium Battery Shipping:\u003c\/strong\u003e\u003c\/span\u003e Due to courier restrictions, this product can only be shipped within the United Kingdom. With this item in your cart, your shipping options will be limited and may cost more than our usual rates. Why?\u0026lt;\u0026gt;\n\u003ch2\u003eMI:power or MI:sound?\u003c\/h2\u003e\n\u003cp\u003eLike the MI:power board, MI:sound offers an elegant solution for micro:bit projects on the move.\u003c\/p\u003e\n\u003cp\u003eBoth boards provide power to micro:bit, feature an on\/off switch and allow you to output sound. Sound though is a much bigger feature on the MI:sound board. Where the MI:power board features a buzzer, MI:sound has an actual speaker with a thumbwheel volume control. Not only is the speaker more versatile than a simple sounder, it is also much much louder.\u003c\/p\u003e\n\u003cp\u003eSo, in brief; the MI:power board is more compact and MI:sound is better for projects where sound is an integral part of the project.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePower your BBC micro:bit from a stylish PCB\u003c\/li\u003e\n\u003cli\u003eOn-board speaker (and it's loud!)\u003c\/li\u003e\n\u003cli\u003eThumb wheel operated potentiometer volume control\u003c\/li\u003e\n\u003cli\u003eOnboard CR2032 battery holder\u003c\/li\u003e\n\u003cli\u003eEasy access on\/off switch\u003c\/li\u003e\n\u003cli\u003eDesigned to work with micro:bit V1 and micro:bit V2\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eContents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1 x MI:Sound speaker board for BBC micro:bit V2\u003c\/li\u003e\n\u003cli\u003e3 x 12mm M3 Countersunk Screw\u003c\/li\u003e\n\u003cli\u003e3 x M3 Steel Nuts\u003c\/li\u003e\n\u003cli\u003e3 x Nylon Spacers\u003c\/li\u003e\n\u003cli\u003e1 x CR2032 Coin Cell\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003ch2\u003eRequires\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eA micro:bit\u003c\/li\u003e\n\u003cli\u003eA Micro-USB cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDatasheet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eDimensions\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eLength: 51.6mm\u003c\/li\u003e\n\u003cli\u003eWidth: 43.0mm\u003c\/li\u003e\n\u003cli\u003eHeight: 27.5mm\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Kitronik","offers":[{"title":"Default Title","offer_id":48624128196826,"sku":"ngw1789683800985","price":7.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0824\/8318\/3834\/files\/misound-speaker-board-for-bbc-microbit-v2_1.jpg?v=1789683805"},{"product_id":"compact-motor-driver-board-for-the-bbc-microbit","title":"Compact Motor Driver Board for the BBC micro:bit","description":"\u003cp\u003eAdd motor driving capability to the micro:bit with the Kitronik compact motor driver board.\u003c\/p\u003e \u003cp\u003eThis motor driver board allows two motors to be driven simultaneously with forward, reverse \u0026amp; stop control, making it ideal for designs such as buggies. The board has built-in short circuit, over current and thermal protection.\u003c\/p\u003e \u003cp\u003eThe board includes an integrated Edge Connector for your BBC micro:bit to easily slot into. It also features external connections to the button A and button B inputs. This allows additional switches\/inputs to be connected to the motor driver board and the state of these can then be read by the BBC micro:bit.\u003c\/p\u003e \u003cp\u003eThere are 2 additional inputs\/outputs. These can be used for connecting a range of parts and can be used in either digital or analogue modes.\u003c\/p\u003e \u003cp\u003ePower is provided via either a terminal block or servo style connector, the supply is then controlled by an on\/off power switch to the board. There is a green LED to indicate when the board is turned on. The board also produces a regulated 3V supply that is fed into the 40 way connector to power the inserted BBC micro:bit, removing the need to power the BBC micro:bit directly.\u003c\/p\u003e \u003cp\u003eKitronik has produced a set of custom blocks for the MakeCode editor to simplify using the Compact motor driver board. To add them to the editor, select the cog icon in the top right of the editor. Then, select Extensions from the drop-down menu and in the search bar type and enter Kitronik. Pick the Kitronik motor driver tile from the list and the new blocks will be added to the menu in the editor.\u003c\/p\u003e \u003ch2\u003eFeatures\u003c\/h2\u003e \u003cul\u003e \u003cli\u003eIdeal for designs such as buggies and other robotics projects\u003c\/li\u003e \u003cli\u003eDrive 2 motors with full forward, reverse and stop control\u003c\/li\u003e \u003cli\u003eTerminal blocks for easy connection of motors and inputs\u003c\/li\u003e \u003cli\u003eThe 2 additional inputs\/outputs can be used in either digital or analogue modes\u003c\/li\u003e \u003cli\u003eThis board also features an on\/off switch and power status LED\u003c\/li\u003e \u003cli\u003eIncludes Edge Connector for the BBC micro:bit to slot into\u003c\/li\u003e \u003cli\u003eProvides regulated power to the BBC micro:bit\u003c\/li\u003e \u003cli\u003eAccess the other BBC micro:bit pins easily and conveniently\u003c\/li\u003e \u003cli\u003eProgram with the MakeCode editor or with python\u003c\/li\u003e \u003c\/ul\u003e \u003ch2\u003eContents\u003c\/h2\u003e \u003cul\u003e \u003cli\u003e1 x Compact Motor Driver Board for the BBC micro:bit.\u003c\/li\u003e \u003c\/ul\u003e \u003ch2\u003eResources\u003c\/h2\u003e \u003cul\u003e \u003cli\u003eDatasheet\u003c\/li\u003e \u003cli\u003ePython example code\u003c\/li\u003e \u003c\/ul\u003e \u003ch2\u003eRequires\u003c\/h2\u003e \u003cul\u003e \u003cli\u003eA micro:bit\u003c\/li\u003e \u003cli\u003eUSB Cable\u003c\/li\u003e \u003cli\u003ePower Supply\u003c\/li\u003e \u003cli\u003eMotors\u003c\/li\u003e \u003c\/ul\u003e \u003ch2\u003eDimensions\u003c\/h2\u003e \u003cul\u003e \u003cli\u003eLength: 68mm\u003c\/li\u003e \u003cli\u003eWidth: 46.5mm\u003c\/li\u003e \u003cli\u003eHeight: 10.6mm\u003c\/li\u003e \u003cli\u003ePCB Thickness: 1.6mm\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eNote\u003c\/strong\u003e: micro:bit, motors and robotics parts not included\u003c\/p\u003e","brand":"Kitronik","offers":[{"title":"Default Title","offer_id":48624128622810,"sku":"lej1789683810494","price":12.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0824\/8318\/3834\/files\/compact-motor-driver-board-for-the-bbc-microbit_1.jpg?v=1789683841"},{"product_id":"mipower-board-for-the-bbc-microbit-v2","title":"MI:power board for the BBC Microbit V2","description":"\u003cp\u003eThe MI:power board for the BBC micro:bit brings real portability to your wearable projects. The stylish, lightweight PCB is designed to fit snugly against the BBC micro:bit and features a built-in buzzer and 3V coin cell holder. This latest version has been redesigned to fit both the the V1 and V2 micro:bit.\u003c\/p\u003e\n\u003cp\u003eWhen assembled, the MI:power board is connected directly to the 3V, GND and P0 connections on the micro:bit. The 3V and GND connections provide power to the micro:bit and the built-in buzzer is connected to P0, which is the default output pin when using the audio functions in the Block Editor software.\u003c\/p\u003e\n\u003cp\u003eThe board has an \u003cstrong\u003eeasy to access on\/off switch\u003c\/strong\u003e, which makes it easy to turn a project on and off, rather than have to disconnect the power supply from the BBC micro:bit.\u003c\/p\u003e\n\u003cp\u003eOnce the unit is assembled and attached to the BBC micro:bit the mechanical fixings prevent the battery from being removed unless you use a screwdriver, so whatever the use, the battery will remain safely in place.\u003c\/p\u003e\n\u0026lt;\u0026gt;\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003eLithium Battery Shipping:\u003c\/strong\u003e\u003c\/span\u003e Due to courier restrictions, this product can only be shipped within the United Kingdom. With this item in your cart your shipping options will be limited and may cost more than our usual rates. Why?\u0026lt;\u0026gt;\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePower your BBC micro:bit from a stylish PCB\u003c\/li\u003e\n\u003cli\u003eBreak free from the tether to the computer and take your project mobile\u003c\/li\u003e\n\u003cli\u003eOn-Board buzzer\u003c\/li\u003e\n\u003cli\u003eEasy access on\/off switch\u003c\/li\u003e\n\u003cli\u003eGreat for micro:bit mood badges, to allow your micro:bit to become a handheld remote control, and much more\u003c\/li\u003e\n\u003cli\u003eThis accessory is supplied with spacers, fixings and a battery\u003c\/li\u003e\n\u003cli\u003eNo soldering required\u003c\/li\u003e\n\u003cli\u003eLength: 51mm \/ Width: 42mm \/ Height: 6mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eNote:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSpacers, fixings and a battery are all provided\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eBBC micro:bit is NOT included\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eThis accessory requires some assembly\u003c\/li\u003e\n\u003cli\u003eNo Soldering required\u003c\/li\u003e\n\u003cli\u003eWorks with micro:bit V1 and micro:bit V2\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eContents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1 x MI:power board for the BBC micro:bit\u003c\/li\u003e\n\u003cli\u003e3 x Counter Sunk M3 Machine Screws\u003c\/li\u003e\n\u003cli\u003e3 x M3 Hex Full Width Nuts\u003c\/li\u003e\n\u003cli\u003e3 x Plastic Spacers\u003c\/li\u003e\n\u003cli\u003e1 x CR2032 3V Coin Cell\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eRequires\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1 x BBC micro:bit\u003c\/li\u003e\n\u003cli\u003ePozi drive screwdriver\u003c\/li\u003e\n\u003cli\u003ePliers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBuild Instructions\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Kitronik","offers":[{"title":"Default Title","offer_id":48624129278170,"sku":"teb1789683869246","price":6.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0824\/8318\/3834\/files\/mipower-board-for-the-bbc-microbit-v2_1.jpg?v=1789683874"},{"product_id":"klip-motor-driver-for-bbc-microbit","title":"Klip Motor Driver for BBC micro:bit","description":"\u003cp\u003eThe Klip Motor Driver for the BBC micro:bit does much more than just drive motors. It also breaks out pins 0, 1, 2, 3V and GDN (just like the main pads on the BBC micro:bit itself), and there’s a ZIP LED output as well, along with the battery voltage and another GND connection.\u003c\/p\u003e\n\u003cp\u003eAll of these pads are designed specifically for use with crocodile clips and banana plugs. That means no soldering or fiddling with connection blocks. Also, the pads have been designed and spaced to make it difficult to short two together with crocodile clips. This makes it ideal for use with younger children who can build buggies with little more than a couple of motors, a chassis, some elastic bands and the clip motor driver.\u003c\/p\u003e\n\u003cp\u003eIt can run two DC motors simultaneously, both clockwise and counter-clockwise, and at varying speeds. Some examples of motors to use would be right-angled geared hobby motors and solderless gearmotors. The ZIP LED output connection is ideally suited for use with the ZIP Hex boards, as they also have crocodile clip connections.\u003c\/p\u003e\n\u003cp\u003eThe main BBC micro:bit pin breakout section is great for controlling the Kitronik :CITY products, such as:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSTOP:bit\u003c\/li\u003e\n\u003cli\u003eLAMP:bit\u003c\/li\u003e\n\u003cli\u003eACCESS:bit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe board also features status LEDs. There are LEDs for board powered on, pins 0, 1, 2, 3 and also the two motor outputs. The motor indicator LEDs don't just monitor activity, they also indicate which direction each motor is running in, green for forwards and red for backwards. These LEDs don't just look nice, they are a great way of visually troubleshooting your code and they even allow you test your code without having to connect motors or devices to pins 0, 1, 2, 3.\u003c\/p\u003e\n\u003cp\u003ePower is provided via the integrated battery supply (3 x AA, 4.5V), and the board then produces a regulated 3.3V supply which is fed into the 3V and GND connections to power the connected BBC micro:bit, removing the need to power the BBC micro:bit separately.\u003c\/p\u003e\n\u003cp\u003eKitronik have produced a set of custom blocks for the MakeCode editor to simplify using the Klip Motor Driver. To add them to the editor, select the cog icon in the top right of the editor. Then, select Extensions from the drop-down menu and in the search bar type and enter Kitronik. Pick the tile from the list and the new blocks will be added to the menu in the editor. We've also included blocks within this package for driving any ZIP LEDs you attach to the board. These are primarily for allowing younger children to write code using blocks that are easier to use other coding blocks for addressable LEDs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote\u003c\/strong\u003e: If the BBC micro:bit is powered via its USB connector, and there are no batteries inserted, there will be no power at the 3V output connection – this is to provide some overcurrent protection for the BBC micro:bit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003emicro:bit, Zip LEDs, motors and crocodile clips not included.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCompatible with micro:bit V1 and V2\u003c\/li\u003e\n\u003cli\u003eDrive 2 x DC Motors simultaneously, both clockwise and counter-clockwise\u003c\/li\u003e\n\u003cli\u003eIt breaks out Pins 0, 1, 2, 3V and GDN (just like the main pads on the BBC micro:bit itself)\u003c\/li\u003e\n\u003cli\u003eConnect to the pads with crocodile clips and banana plugs\u003c\/li\u003e\n\u003cli\u003eThere is also an output design specifically for ZIP LEDs\n\u003c\/li\u003e\n\u003cli\u003eThe main BBC micro:bit pin breakout section is great for controlling the Kitronik :CITY products\u003c\/li\u003e\n\u003cli\u003ePower is provided via the integrated battery supply\u003c\/li\u003e\n\u003cli\u003eOutput and motor driver status lights for troubleshooting and testing code prior to attaching motors and devices\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eContents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Klip Motor Driver for the BBC micro:bit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eRequires\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBBC micro:bit\u003c\/li\u003e\n\u003cli\u003e3 x AA Batteries\u003c\/li\u003e\n\u003cli\u003eCrocodile Leads\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eKlip User Guide\u003c\/li\u003e\n\u003cli\u003eDatasheet\u003c\/li\u003e\n\u003cli\u003eKlip MakeCode Extension on GitHub\u003c\/li\u003e\n\u003cli\u003eHow to drive a servo with the :CREATE Klip Motor Driver Board\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eDimensions\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eLength: 72mm\u003c\/li\u003e\n\u003cli\u003eWidth: 70mm\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Kitronik","offers":[{"title":"Default Title","offer_id":48624129704154,"sku":"lsw1789683887115","price":16.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0824\/8318\/3834\/files\/klip-motor-driver-for-bbc-microbit_1.jpg?v=1789683893"},{"product_id":"ultrasonicbit-distance-sensor","title":"Ultrasonic:Bit Distance Sensor","description":"\u003cp\u003eUsing a low-cost ultrasonic distance sensor with the BBC micro:bit is a little tricky. Most of these sensors require 5V to work correctly (which isn’t available on the micro:bit) and when they are powered with 5V, they return a 5V signal which can damage your micro:bit!\u003c\/p\u003e\n\u003cp\u003eThe ultrasonic:bit solves both these issues and makes it easy to measure distance with the BBC micro:bit!\u003c\/p\u003e\n\u003cp\u003eTo ensure the ultrasonic sensor gets the 5V power it needs, a small boost regulator is used to convert the available 3v from the micro:bit to 5v. The digital signal from the sensor is also shifted back down to 3.3V for safe use with the micro:bit.\u003c\/p\u003e\n\u003cp\u003eWe have provided clip holes for alligator clips and screw terminals for the connection to your micro:bit. 4 mounting holes are also available, just in case you need to keep it firmly in place.\u003c\/p\u003e\n\u003cp\u003eThe board ships fully assembled with an ultrasonic sensor. Simply connect up your wires or alligator clips and that’s it!\u003c\/p\u003e\n\u003cp\u003eTo use with MakeCode, simply add the “Sonar” extension and set the pins to match how you have connected it to your micro:bit.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cdiv class=\"featurebox\"\u003e\n\u003cul\u003e\n\u003cli\u003eIntegrated 100mA 5V Boost Regulator\u003c\/li\u003e\n\u003cli\u003eConnect with screw terminals or alligator clips\u003c\/li\u003e\n\u003cli\u003eIntegrated 3.3V Logic Shifting\u003c\/li\u003e\n\u003cli\u003eDimensions: 50 x 64 x 22mm\u003c\/li\u003e\n\u003cli\u003eWeight\u003c\/li\u003e\n\u003cli\u003e17g\u003c\/li\u003e\n\u003cli\u003eManufactured in Canada\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eGetting Started with the Ultrasonic:Bit\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"featurebox\"\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"BCRobotics","offers":[{"title":"Default Title","offer_id":48624149594330,"sku":"kaa1789684701061","price":6.47,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0824\/8318\/3834\/files\/ultrasonicbit-distance-sensor_1.jpg?v=1789684729"},{"product_id":"bitface-robot-face-breakout","title":"BitFace Robot Face Breakout","description":"\u003cp\u003eThis breakout is designed to fit on BitBot XL, MiniBit and the latest (v1.3) version of Robobit Mk3.\u003c\/p\u003e \u003cp\u003eBrighten up your robot, animate its personality and provide status indications!\u003c\/p\u003e \u003cp\u003eThe BitFace provides 17 FireLeds in the shape of a robot face (identical layout to McRoboFace) giving individual control over the colours of every LED. The Makecode extensions for the robots now include categories for driving these new breakout boards\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNote\u003c\/strong\u003e: Microbit, BitBot Xl, MiniBit not included\u003c\/p\u003e","brand":"4tronix","offers":[{"title":"Default Title","offer_id":48624151855322,"sku":"gpg1789684843942","price":8.52,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0824\/8318\/3834\/files\/bitface-robot-face-breakout_1.jpg?v=1789684848"},{"product_id":"io-extender-for-microbit","title":"IO Extender for micro:bit","description":"\u003cdiv class=\"desc\"\u003e\n\u003cdiv class=\"desCon\"\u003e\n\u003cp\u003eThis IO Extender is an easy-to-use and low-cost expansion board for the BBC micro:bit. It breaks out all the micro:bit IO ports, includes an onboard buzzer and buzzer switch, and has a specially-designed port for a 'HuskyLens AI camera' (sold separately). This board can be used to provide a stable 5V power supply for HuskyLens to run steadily in all modes.\u003c\/p\u003e\n\u003cp\u003eThe silkscreens on the back of the board clearly indicate the functions of all interfaces, which can help users to get started easily.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eNote: \u003c\/b\u003e\u003cstrong\u003ePlease supply power via the USB port on this product when using with HuskyLens.\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cdiv class=\"desCon\"\u003e\n\u003cul\u003e\n\u003cli\u003eGravity 3-Pin interface, plug and play, support DFRobot Gravity series\u003c\/li\u003e\n\u003cli\u003eBreaks out all micro:bit pins in the form of 3P pin header, 19 pins in total\u003c\/li\u003e\n\u003cli\u003eIndependent I2C and 1-way serial port\u003c\/li\u003e\n\u003cli\u003eOnboard buzzer and buzzer switch\u003c\/li\u003e\n\u003cli\u003eOnboard edge connector contacts\u003c\/li\u003e\n\u003cli\u003eClear silkscreen, ENIG technology and high quality\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cdiv class=\"desCon\"\u003e\n\u003cul\u003e\n\u003cli\u003ePower: 5V MicroUSB\u003c\/li\u003e\n\u003cli\u003eGPIO (3.3V): P3 P0 P4 P5 P6 P7 P1 P8 P9 P10 P11 P12 P13 P14 P15 P16 P19 P20\u003c\/li\u003e\n\u003cli\u003eBuzzer: P0, turn off the buzzer switch and then P0 port can be used normally\u003c\/li\u003e\n\u003cli\u003e2x I2C Ports (3.3V)\u003c\/li\u003e\n\u003cli\u003e1x HuskyLens-I2C Port (5V)\u003c\/li\u003e\n\u003cli\u003e1x Buzzer\u003c\/li\u003e\n\u003cli\u003eDimension: 66.0 x 50.5mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cdiv class=\"desCon\"\u003e\n\u003cul\u003e\n\u003cli\u003eProduct wiki\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cdiv class=\"desCon\"\u003e\n\u003cul class=\"list-paddingleft-2\" style=\"list-style-type: disc;\"\u003e\n\u003cli\u003e1x IO Extender for micro:bit (V2.0)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"DFRobot","offers":[{"title":"Default Title","offer_id":48624187211994,"sku":"yxy1789686040364","price":4.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0824\/8318\/3834\/files\/io-extender-for-microbit_1.jpg?v=1789686045"},{"product_id":"micromate-mini-expansion-board-for-microbit-gravity-compatible","title":"micro:Mate - Mini Expansion Board for micro:bit (Gravity Compatible)","description":"\u003cp\u003emicro:Mate is a tiny micro:bit I\/O expansion board for learning electronics and building DIY projects. It expands 6 sets of 3-pin I\/O interfaces, capable of connecting DFRobot Gravity series modules, servo motors, sensors and jumper wires.\u003c\/p\u003e\n\u003cp\u003eAdditionally, Pin 8, 12 and 16 support voltage switch between 3V-5V, allowing up to 5V 2A digital (PWM) output!\u003c\/p\u003e\n\u003cp\u003eMicro:Mate is the same dimensions as the BBC micro:bit board. It connects to the micro:bit through spring-loaded contact pins ensuring an easy, compact and secure connection. The rubber bumpers and the 3.5mm audio jack on the back side ensure a stable connection and prevent reversed connections.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNote: micro:bit board\u003cspan style=\"font-size: 0.875rem;\" data-mce-style=\"font-size: 0.875rem;\"\u003e is NOT\u003c\/span\u003e included\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli class=\"desCon\"\u003eThe mounting screws should be well tightened to ensure a secured connection\u003c\/li\u003e\n\u003cli class=\"desCon\"\u003emicro:Mate only supports 3V (3.3V) analog input from Pin 0, 1, 2\u003c\/li\u003e\n\u003cli class=\"desCon\"\u003eThe Micro USB Power port on Micro:Mate cannot be used for data transmission\u003c\/li\u003e\n\u003cli class=\"desCon\"\u003eComponents with large power consumption should be connected to Pin 8, 12, 16 with a 5V power supply\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"desCon\"\u003e\n\u003cdiv id=\"div1\" style=\"display: none;\" data-mce-style=\"display: none;\"\u003e\n\u003ctable width=\"891\" style=\"border: 1px solid #000000;\" data-mce-style=\"border: 1px solid #000000;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" style=\"text-align: center; border: 1px solid #000000;\" width=\"131\" bgcolor=\"#ed6a00;\" data-mce-style=\"text-align: center; border: 1px solid #000000;\"\u003e\u003cspan style=\"font-size: 16px;\" data-mce-style=\"font-size: 16px;\"\u003e\u003cb\u003eProduct Image\u003c\/b\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"text-align: center; border: 1px solid #000000;\" width=\"250\" data-mce-style=\"text-align: center; border: 1px solid #000000;\"\u003e\u003cspan style=\"font-size: 16px;\" data-mce-style=\"font-size: 16px;\"\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"text-align: center; border: 1px solid #000000;\" width=\"250\" data-mce-style=\"text-align: center; border: 1px solid #000000;\"\u003e\u003cspan style=\"font-size: 16px;\" data-mce-style=\"font-size: 16px;\"\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"text-align: center; border: 1px solid #000000;\" width=\"250\" data-mce-style=\"text-align: center; border: 1px solid #000000;\"\u003e\u003cspan style=\"font-size: 16px;\" data-mce-style=\"font-size: 16px;\"\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"text-align: center; border: 1px solid #000000;\" bgcolor=\"#ed6a00;\" width=\"250\" data-mce-style=\"text-align: center; border: 1px solid #000000;\"\u003e\u003cspan style=\"color: #1e91cf;\" data-mce-style=\"color: #1e91cf;\"\u003e\u003cspan style=\"font-size: 16px;\" data-mce-style=\"font-size: 16px;\"\u003e\u003cb\u003e\u003cu\u003eMicro:Mate - A Mini Expansion Board for micro:bit (Gravity Compatible)\u003c\/u\u003e\u003c\/b\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"text-align: center; border: 1px solid #000000;\" bgcolor=\"#ed6a00;\" width=\"250\" data-mce-style=\"text-align: center; border: 1px solid #000000;\"\u003e\u003cspan style=\"color: #1e91cf;\" data-mce-style=\"color: #1e91cf;\"\u003e\u003cspan style=\"font-size: 16px;\" data-mce-style=\"font-size: 16px;\"\u003e\u003cb\u003e\u003cu\u003emicro:bit Expansion Board for Boson (Gravity Compatible)\u003c\/u\u003e\u003c\/b\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" style=\"text-align: center; border: 1px solid #000000;\" width=\"131\" bgcolor=\"#ed6a00;\" data-mce-style=\"text-align: center; border: 1px solid #000000;\"\u003e\u003cb\u003e\u003cspan style=\"font-size: 16px;\" data-mce-style=\"font-size: 16px;\"\u003eSKU\u003c\/span\u003e\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"text-align: center; border: 1px solid #000000;\" width=\"250\" data-mce-style=\"text-align: center; border: 1px solid #000000;\"\u003e\u003cspan style=\"font-size: 16px;\" data-mce-style=\"font-size: 16px;\"\u003eDFR0497\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"text-align: center; border: 1px solid #000000;\" width=\"250\" data-mce-style=\"text-align: center; border: 1px solid #000000;\"\u003e\u003cspan style=\"font-size: 16px;\" data-mce-style=\"font-size: 16px;\"\u003eDFR0518\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"text-align: center; border: 1px solid #000000;\" width=\"250\" data-mce-style=\"text-align: center; border: 1px solid #000000;\"\u003e\u003cspan style=\"font-size: 16px;\" data-mce-style=\"font-size: 16px;\"\u003eDFR0521\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" style=\"text-align: center; border: 1px solid #000000;\" width=\"131\" bgcolor=\"#ed6a00;\" data-mce-style=\"text-align: center; border: 1px solid #000000;\"\u003e\u003cspan style=\"font-size: 16px;\" data-mce-style=\"font-size: 16px;\"\u003e\u003cb\u003eOperating Voltage\u003c\/b\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"text-align: center; border: 1px solid #000000;\" width=\"250\" data-mce-style=\"text-align: center; border: 1px solid #000000;\"\u003e\u003cspan style=\"font-size: 16px;\" data-mce-style=\"font-size: 16px;\"\u003e3.5~5.5V\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"text-align: center; border: 1px solid #000000;\" width=\"250\" data-mce-style=\"text-align: center; border: 1px solid #000000;\"\u003e\u003cspan style=\"font-size: 16px;\" data-mce-style=\"font-size: 16px;\"\u003e3.3V\/5V\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"text-align: center; border: 1px solid #000000;\" width=\"250\" data-mce-style=\"text-align: center; border: 1px solid #000000;\"\u003e\u003cspan style=\"font-size: 16px;\" data-mce-style=\"font-size: 16px;\"\u003e3.3V\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" style=\"text-align: center; border: 1px solid #000000;\" width=\"131\" bgcolor=\"#ed6a00;\" data-mce-style=\"text-align: center; border: 1px solid #000000;\"\u003e\u003cspan style=\"font-size: 16px;\" data-mce-style=\"font-size: 16px;\"\u003e\u003cb\u003ePower supply \u003c\/b\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"text-align: center; border: 1px solid #000000;\" width=\"250\" data-mce-style=\"text-align: center; border: 1px solid #000000;\"\u003e\u003cspan style=\"font-size: 16px;\" data-mce-style=\"font-size: 16px;\"\u003eDC2.1\/Terminals\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"text-align: center; border: 1px solid #000000;\" width=\"250\" data-mce-style=\"text-align: center; border: 1px solid #000000;\"\u003e\u003cspan style=\"font-size: 16px;\" data-mce-style=\"font-size: 16px;\"\u003eUSB\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"text-align: center; border: 1px solid #000000;\" width=\"250\" data-mce-style=\"text-align: center; border: 1px solid #000000;\"\u003e\u003cspan style=\"font-size: 16px;\" data-mce-style=\"font-size: 16px;\"\u003eUSB\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" style=\"text-align: center; border: 1px solid #000000;\" width=\"131\" bgcolor=\"#ed6a00;\" data-mce-style=\"text-align: center; border: 1px solid #000000;\"\u003e\u003cspan style=\"font-size: 16px;\" data-mce-style=\"font-size: 16px;\"\u003e\u003cb\u003eExternal supply voltage\u003c\/b\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"text-align: center; border: 1px solid #000000;\" width=\"250\" data-mce-style=\"text-align: center; border: 1px solid #000000;\"\u003e\u003cspan style=\"font-size: 16px;\" data-mce-style=\"font-size: 16px;\"\u003e3.5~5.5V\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"text-align: center; border: 1px solid #000000;\" width=\"250\" data-mce-style=\"text-align: center; border: 1px solid #000000;\"\u003e\u003cspan style=\"font-size: 16px;\" data-mce-style=\"font-size: 16px;\"\u003e3.3V\/5V\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"text-align: center; border: 1px solid #000000;\" width=\"250\" data-mce-style=\"text-align: center; border: 1px solid #000000;\"\u003e\u003cspan style=\"font-size: 16px;\" data-mce-style=\"font-size: 16px;\"\u003e3.3V\/5V\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" style=\"text-align: center; border: 1px solid #000000;\" width=\"131\" bgcolor=\"#ed6a00;\" data-mce-style=\"text-align: center; border: 1px solid #000000;\"\u003e\u003cspan style=\"font-size: 16px;\" data-mce-style=\"font-size: 16px;\"\u003e\u003cb\u003eDigital ports (IO\/PWM)\u003c\/b\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"text-align: center; border: 1px solid #000000;\" width=\"250\" data-mce-style=\"text-align: center; border: 1px solid #000000;\"\u003e\u003cspan style=\"font-size: 16px;\" data-mce-style=\"font-size: 16px;\"\u003e17\/8\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"text-align: center; border: 1px solid #000000;\" width=\"250\" data-mce-style=\"text-align: center; border: 1px solid #000000;\"\u003e\u003cspan style=\"font-size: 16px;\" data-mce-style=\"font-size: 16px;\"\u003e3\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"text-align: center; border: 1px solid #000000;\" width=\"250\" data-mce-style=\"text-align: center; border: 1px solid #000000;\"\u003e\u003cspan style=\"font-size: 16px;\" data-mce-style=\"font-size: 16px;\"\u003e3\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" style=\"text-align: center; border: 1px solid #000000;\" width=\"131\" bgcolor=\"#ed6a00;\" data-mce-style=\"text-align: center; border: 1px solid #000000;\"\u003e\u003cspan style=\"font-size: 16px;\" data-mce-style=\"font-size: 16px;\"\u003e\u003cb\u003eAnalog ports (input\/output)\u003c\/b\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"text-align: center; border: 1px solid #000000;\" width=\"250\" data-mce-style=\"text-align: center; border: 1px solid #000000;\"\u003e\u003cspan style=\"font-size: 16px;\" data-mce-style=\"font-size: 16px;\"\u003eP0、P1、P2\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"text-align: center; border: 1px solid #000000;\" width=\"250\" data-mce-style=\"text-align: center; border: 1px solid #000000;\"\u003e\u003cspan style=\"font-size: 16px;\" data-mce-style=\"font-size: 16px;\"\u003e3\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"text-align: center; border: 1px solid #000000;\" width=\"250\" data-mce-style=\"text-align: center; border: 1px solid #000000;\"\u003e\u003cspan style=\"font-size: 16px;\" data-mce-style=\"font-size: 16px;\"\u003e3\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" style=\"text-align: center; border: 1px solid #000000;\" width=\"131\" bgcolor=\"#ed6a00;\" data-mce-style=\"text-align: center; border: 1px solid #000000;\"\u003e\u003cspan style=\"font-size: 16px;\" data-mce-style=\"font-size: 16px;\"\u003e\u003cb\u003eUART\u003c\/b\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"text-align: center; border: 1px solid #000000;\" width=\"250\" data-mce-style=\"text-align: center; border: 1px solid #000000;\"\u003e\u003cspan style=\"font-size: 16px;\" data-mce-style=\"font-size: 16px;\"\u003ex\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"text-align: center; border: 1px solid #000000;\" width=\"250\" data-mce-style=\"text-align: center; border: 1px solid #000000;\"\u003e\u003cspan style=\"font-size: 16px;\" data-mce-style=\"font-size: 16px;\"\u003ex\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"text-align: center; border: 1px solid #000000;\" width=\"250\" data-mce-style=\"text-align: center; border: 1px solid #000000;\"\u003e\u003cspan style=\"font-size: 16px;\" data-mce-style=\"font-size: 16px;\"\u003ex\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" style=\"text-align: center; border: 1px solid #000000;\" width=\"131\" bgcolor=\"#ed6a00;\" data-mce-style=\"text-align: center; border: 1px solid #000000;\"\u003e\u003cspan style=\"font-size: 16px;\" data-mce-style=\"font-size: 16px;\"\u003e\u003cb\u003eI2C\u003c\/b\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"text-align: center; border: 1px solid #000000;\" width=\"250\" data-mce-style=\"text-align: center; border: 1px solid #000000;\"\u003e\u003cspan style=\"font-size: 16px;\" data-mce-style=\"font-size: 16px;\"\u003e2\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"text-align: center; border: 1px solid #000000;\" width=\"250\" data-mce-style=\"text-align: center; border: 1px solid #000000;\"\u003e\u003cspan style=\"font-size: 16px;\" data-mce-style=\"font-size: 16px;\"\u003ex\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"text-align: center; border: 1px solid #000000;\" width=\"250\" data-mce-style=\"text-align: center; border: 1px solid #000000;\"\u003e\u003cspan style=\"font-size: 16px;\" data-mce-style=\"font-size: 16px;\"\u003ex\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" style=\"text-align: center; border: 1px solid #000000;\" width=\"131\" bgcolor=\"#ed6a00;\" data-mce-style=\"text-align: center; border: 1px solid #000000;\"\u003e\u003cspan style=\"font-size: 16px;\" data-mce-style=\"font-size: 16px;\"\u003e\u003cb\u003eSPI\u003c\/b\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"text-align: center; border: 1px solid #000000;\" width=\"250\" data-mce-style=\"text-align: center; border: 1px solid #000000;\"\u003e\u003cspan style=\"font-size: 16px;\" data-mce-style=\"font-size: 16px;\"\u003ex\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"text-align: center; border: 1px solid #000000;\" width=\"250\" data-mce-style=\"text-align: center; border: 1px solid #000000;\"\u003e\u003cspan style=\"font-size: 16px;\" data-mce-style=\"font-size: 16px;\"\u003ex\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"text-align: center; border: 1px solid #000000;\" width=\"250\" data-mce-style=\"text-align: center; border: 1px solid #000000;\"\u003e\u003cspan style=\"font-size: 16px;\" data-mce-style=\"font-size: 16px;\"\u003ex\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" style=\"text-align: center; border: 1px solid #000000;\" width=\"131\" bgcolor=\"#ed6a00;\" data-mce-style=\"text-align: center; border: 1px solid #000000;\"\u003e\u003cspan style=\"font-size: 16px;\" data-mce-style=\"font-size: 16px;\"\u003e\u003cb\u003eInterrupt pin (quantity)\u003c\/b\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"text-align: center; border: 1px solid #000000;\" width=\"250\" data-mce-style=\"text-align: center; border: 1px solid #000000;\"\u003e\u003cspan style=\"font-size: 16px;\" data-mce-style=\"font-size: 16px;\"\u003ex\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"text-align: center; border: 1px solid #000000;\" width=\"250\" data-mce-style=\"text-align: center; border: 1px solid #000000;\"\u003e\u003cspan style=\"font-size: 16px;\" data-mce-style=\"font-size: 16px;\"\u003ex\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"text-align: center; border: 1px solid #000000;\" width=\"250\" data-mce-style=\"text-align: center; border: 1px solid #000000;\"\u003e\u003cspan style=\"font-size: 16px;\" data-mce-style=\"font-size: 16px;\"\u003ex\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" style=\"text-align: center; border: 1px solid #000000;\" width=\"131\" bgcolor=\"#ed6a00;\" data-mce-style=\"text-align: center; border: 1px solid #000000;\"\u003e\u003cspan style=\"font-size: 16px;\" data-mce-style=\"font-size: 16px;\"\u003e\u003cb\u003eInterface Type\u003c\/b\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"text-align: center; border: 1px solid #000000;\" width=\"250\" data-mce-style=\"text-align: center; border: 1px solid #000000;\"\u003e\u003cspan style=\"font-size: 16px;\" data-mce-style=\"font-size: 16px;\"\u003eGravity\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"text-align: center; border: 1px solid #000000;\" width=\"250\" data-mce-style=\"text-align: center; border: 1px solid #000000;\"\u003e\u003cspan style=\"font-size: 16px;\" data-mce-style=\"font-size: 16px;\"\u003eGravity\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"text-align: center; border: 1px solid #000000;\" width=\"250\" data-mce-style=\"text-align: center; border: 1px solid #000000;\"\u003e\u003cspan style=\"font-size: 16px;\" data-mce-style=\"font-size: 16px;\"\u003eGravity\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" style=\"text-align: center; border: 1px solid #000000;\" width=\"131\" bgcolor=\"#ed6a00;\" data-mce-style=\"text-align: center; border: 1px solid #000000;\"\u003e\u003cspan style=\"font-size: 16px;\" data-mce-style=\"font-size: 16px;\"\u003e\u003cb\u003e3.5mm headphone port\u003c\/b\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"text-align: center; border: 1px solid #000000;\" width=\"250\" data-mce-style=\"text-align: center; border: 1px solid #000000;\"\u003e\u003cspan style=\"font-size: 16px;\" data-mce-style=\"font-size: 16px;\"\u003ex\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"text-align: center; border: 1px solid #000000;\" width=\"250\" data-mce-style=\"text-align: center; border: 1px solid #000000;\"\u003e\u003cspan style=\"font-size: 16px;\" data-mce-style=\"font-size: 16px;\"\u003e√\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"text-align: center; border: 1px solid #000000;\" width=\"250\" data-mce-style=\"text-align: center; border: 1px solid #000000;\"\u003e\u003cspan style=\"font-size: 16px;\" data-mce-style=\"font-size: 16px;\"\u003e√\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" style=\"text-align: center; border: 1px solid #000000;\" width=\"131\" bgcolor=\"#ed6a00;\" data-mce-style=\"text-align: center; border: 1px solid #000000;\"\u003e\u003cspan style=\"font-size: 16px;\" data-mce-style=\"font-size: 16px;\"\u003e\u003cb\u003eDimension\u003c\/b\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"text-align: center; border: 1px solid #000000;\" width=\"250\" data-mce-style=\"text-align: center; border: 1px solid #000000;\"\u003e\u003cspan style=\"font-size: 16px;\" data-mce-style=\"font-size: 16px;\"\u003e63 x 58 mm\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"text-align: center; border: 1px solid #000000;\" width=\"250\" data-mce-style=\"text-align: center; border: 1px solid #000000;\"\u003e\u003cspan style=\"font-size: 16px;\" data-mce-style=\"font-size: 16px;\"\u003e68.5×53.3 mm\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"text-align: center; border: 1px solid #000000;\" width=\"250\" data-mce-style=\"text-align: center; border: 1px solid #000000;\"\u003e\u003cspan style=\"font-size: 16px;\" data-mce-style=\"font-size: 16px;\"\u003e80×70 mm\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" style=\"text-align: center; border: 1px solid #000000;\" width=\"131\" bgcolor=\"#ed6a00;\" data-mce-style=\"text-align: center; border: 1px solid #000000;\"\u003e\u003cspan style=\"font-size: 16px;\" data-mce-style=\"font-size: 16px;\"\u003e\u003cb\u003eMounting hole\u003c\/b\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"text-align: center; border: 1px solid #000000;\" width=\"250\" data-mce-style=\"text-align: center; border: 1px solid #000000;\"\u003e\u003cspan style=\"font-size: 16px;\" data-mce-style=\"font-size: 16px;\"\u003e 50*55\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"text-align: center; border: 1px solid #000000;\" width=\"250\" data-mce-style=\"text-align: center; border: 1px solid #000000;\"\u003e\u003cspan style=\"font-size: 16px;\" data-mce-style=\"font-size: 16px;\"\u003e-\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"text-align: center; border: 1px solid #000000;\" width=\"250\" data-mce-style=\"text-align: center; border: 1px solid #000000;\"\u003e\u003cspan style=\"font-size: 16px;\" data-mce-style=\"font-size: 16px;\"\u003e-\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" style=\"text-align: center; border: 1px solid #000000;\" width=\"131\" bgcolor=\"#ed6a00;\" data-mce-style=\"text-align: center; border: 1px solid #000000;\"\u003e\u003cspan style=\"font-size: 16px;\" data-mce-style=\"font-size: 16px;\"\u003e\u003cb\u003eWeight (g)\u003c\/b\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"text-align: center; border: 1px solid #000000;\" width=\"250\" data-mce-style=\"text-align: center; border: 1px solid #000000;\"\u003e\u003cspan style=\"font-size: 16px;\" data-mce-style=\"font-size: 16px;\"\u003e64\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"text-align: center; border: 1px solid #000000;\" width=\"250\" data-mce-style=\"text-align: center; border: 1px solid #000000;\"\u003e\u003cspan style=\"font-size: 16px;\" data-mce-style=\"font-size: 16px;\"\u003e23\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"text-align: center; border: 1px solid #000000;\" width=\"250\" data-mce-style=\"text-align: center; border: 1px solid #000000;\"\u003e\u003cspan style=\"font-size: 16px;\" data-mce-style=\"font-size: 16px;\"\u003e48\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" style=\"text-align: center; border: 1px solid #000000;\" width=\"131\" bgcolor=\"#ed6a00;\" data-mce-style=\"text-align: center; border: 1px solid #000000;\"\u003e\u003cspan style=\"font-size: 16px;\" data-mce-style=\"font-size: 16px;\"\u003e\u003cb\u003ePrice\u003c\/b\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"text-align: center; border: 1px solid #000000;\" width=\"250\" data-mce-style=\"text-align: center; border: 1px solid #000000;\"\u003e\u003cspan style=\"font-size: 16px;\" data-mce-style=\"font-size: 16px;\"\u003e$14.9\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"text-align: center; border: 1px solid #000000;\" width=\"250\" data-mce-style=\"text-align: center; border: 1px solid #000000;\"\u003e\u003cspan style=\"font-size: 16px;\" data-mce-style=\"font-size: 16px;\"\u003e$5.9\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"text-align: center; border: 1px solid #000000;\" width=\"250\" data-mce-style=\"text-align: center; border: 1px solid #000000;\"\u003e\u003cspan style=\"font-size: 16px;\" data-mce-style=\"font-size: 16px;\"\u003e$7.9\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" style=\"text-align: center; border: 1px solid #000000;\" width=\"131\" bgcolor=\"#ed6a00;\" data-mce-style=\"text-align: center; border: 1px solid #000000;\"\u003e\u003cspan style=\"font-size: 16px;\" data-mce-style=\"font-size: 16px;\"\u003e\u003cb\u003eDrive the servo\u003c\/b\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"text-align: center; border: 1px solid #000000;\" width=\"250\" data-mce-style=\"text-align: center; border: 1px solid #000000;\"\u003e\u003cspan style=\"font-size: 16px;\" data-mce-style=\"font-size: 16px;\"\u003e√\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"text-align: center; border: 1px solid #000000;\" width=\"250\" data-mce-style=\"text-align: center; border: 1px solid #000000;\"\u003e\u003cspan style=\"font-size: 16px;\" data-mce-style=\"font-size: 16px;\"\u003e√\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"text-align: center; border: 1px solid #000000;\" width=\"250\" data-mce-style=\"text-align: center; border: 1px solid #000000;\"\u003e\u003cspan style=\"font-size: 16px;\" data-mce-style=\"font-size: 16px;\"\u003ex\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" style=\"text-align: center; border: 1px solid #000000;\" width=\"131\" bgcolor=\"#ed6a00;\" data-mce-style=\"text-align: center; border: 1px solid #000000;\"\u003e\u003cspan style=\"font-size: 16px;\" data-mce-style=\"font-size: 16px;\"\u003e\u003cb\u003eScenarios\u003c\/b\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"text-align: center; border: 1px solid #000000;\" width=\"250\" data-mce-style=\"text-align: center; border: 1px solid #000000;\"\u003e\u003cspan style=\"font-size: 16px;\" data-mce-style=\"font-size: 16px;\"\u003eMany motors and sensors needed\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"text-align: center; border: 1px solid #000000;\" width=\"250\" data-mce-style=\"text-align: center; border: 1px solid #000000;\"\u003e\u003cspan style=\"font-size: 16px;\" data-mce-style=\"font-size: 16px;\"\u003eSuitable for small Works\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"text-align: center; border: 1px solid #000000;\" width=\"250\" data-mce-style=\"text-align: center; border: 1px solid #000000;\"\u003e\u003cspan style=\"font-size: 16px;\" data-mce-style=\"font-size: 16px;\"\u003eInitial Stage\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" style=\"text-align: center; border: 1px solid #000000;\" width=\"131\" bgcolor=\"#ed6a00;\" data-mce-style=\"text-align: center; border: 1px solid #000000;\"\u003e\u003cspan style=\"font-size: 16px;\" data-mce-style=\"font-size: 16px;\"\u003e\u003cb\u003eKey Features\u003c\/b\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"text-align: center; border: 1px solid #000000;\" width=\"250\" data-mce-style=\"text-align: center; border: 1px solid #000000;\"\u003e\n\u003cp style=\"text-align: left;\" data-mce-style=\"text-align: left;\"\u003e\u003cspan style=\"font-size: 16px;\" data-mce-style=\"font-size: 16px;\"\u003e17 io ports with 2 i2c interfaces\u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: left;\" data-mce-style=\"text-align: left;\"\u003e\u003cspan style=\"font-size: 16px;\" data-mce-style=\"font-size: 16px;\"\u003eCan drive Quad DC Motor Driver\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"text-align: center; border: 1px solid #000000;\" width=\"250\" data-mce-style=\"text-align: center; border: 1px solid #000000;\"\u003e\n\u003cp style=\"text-align: left;\" data-mce-style=\"text-align: left;\"\u003e\u003cspan style=\"font-size: 16px;\" data-mce-style=\"font-size: 16px;\"\u003eIO port expands 6 and the pin replaces the edge connector slot\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv style=\"text-align: left;\" data-mce-style=\"text-align: left;\"\u003e\u003cspan style=\"font-size: 16px; background-color: transparent;\" data-mce-style=\"font-size: 16px; background-color: transparent;\"\u003eAnti-reverse pad on the back, which protects the control board and prevents micro-reverse\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv style=\"text-align: left;\" data-mce-style=\"text-align: left;\"\u003e\u003cspan style=\"font-size: 16px; background-color: transparent;\" data-mce-style=\"font-size: 16px; background-color: transparent;\"\u003eDrive high current equipment, such as steering gear, components connected to 8 12 16\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv style=\"text-align: left;\" data-mce-style=\"text-align: left;\"\u003e\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"text-align: left; border: 1px solid #000000;\" width=\"250\" data-mce-style=\"text-align: left; border: 1px solid #000000;\"\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 16px;\" data-mce-style=\"font-size: 16px;\"\u003e3-Pin fool-proof connector x 6\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 16px;\" data-mce-style=\"font-size: 16px;\"\u003eEdge Connector\u003c\/span\u003e\u003c\/p\u003e\n\u003cscript type=\"text\/javascript\"\u003e \u003c!-- function MM_jumpMenu(targ,selObj,restore){ \/\/v3.0 eval(targ+\".location='\"+selObj.options[selObj.selectedIndex].value+\"'\"); if (restore) selObj.selectedIndex=0; } \/\/--\u003e \u003c\/script\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cform action=\"\" method=\"get\"\u003e\n\u003clabel\u003e\u003cspan style=\"font-size: 16px;\" data-mce-style=\"font-size: 16px;\"\u003eCompatible with sensor\u003c\/span\u003e\u003c\/label\u003e\u003cselect onchange=\"window.open(this.options[this.selectedIndex].value,'','_blank')\"\u003e\n\u003coption value=\"blank\" target=\"_blank\"\u003eCompatible sensor list\u003c\/option\u003e\n\u003coption value=\"https:\/\/thepihut.com\/products\/gravity-digital-pir-motion-sensor-for-arduino\" target=\"_blank\"\u003eGravity: Digital PIR (Motion) Sensor For Arduino\u003c\/option\u003e\n\u003coption value=\"https:\/\/thepihut.com\/products\/gravity-digital-capacitive-touch-sensor-for-arduino\" target=\"_blank\"\u003eGravity: Digital Capacitive Touch Sensor For Arduino\u003c\/option\u003e\n\u003coption value=\"https:\/\/thepihut.com\/products\/gravity-analog-rotation-potentiometer-sensor-v1-for-arduino\" target=\"_blank\"\u003eGravity:Analog Rotation Potentiometer Sensor V1 For Arduino\u003c\/option\u003e\n\u003coption value=\"https:\/\/thepihut.com\/products\/gravity-analog-grayscale-sensor-for-arduino\" target=\"_blank\"\u003eGravity:Analog Grayscale Sensor For Arduino\u003c\/option\u003e\n\u003coption value=\"https:\/\/thepihut.com\/products\/gravity-analog-sound-sensor-for-arduino\" target=\"_blank\"\u003eGravity: Analog Sound Sensor For Arduino\u003c\/option\u003e\n\u003coption value=\"https:\/\/thepihut.com\/products\/gravity-joystick-module-v2\" target=\"_blank\"\u003eGravity: Joystick Module V2\u003c\/option\u003e\n\u003coption value=\"https:\/\/thepihut.com\/products\/gravity-analog-slide-position-potentiometer-sensor-for-arduino\" target=\"_blank\"\u003eGravity: Analog Slide Position (Potentiometer) Sensor For Arduino\u003c\/option\u003e\n\u003coption value=\"https:\/\/www.dfrobot.com\/product-1486.html\" target=\"_blank\"\u003eGravity: Analog AC Current Sensor\u003c\/option\u003e\n\u003coption value=\"https:\/\/thepihut.com\/products\/gravity-heart-rate-monitor-sensor-for-arduino\" target=\"_blank\"\u003eGravity: Heart Rate Monitor Sensor for Arduino\u003c\/option\u003e\n\u003coption value=\"https:\/\/thepihut.com\/products\/gravity-digital-speaker-module\" target=\"_blank\"\u003eGravity: Digital Speaker Module\u003c\/option\u003e\n\u003c\/select\u003e\n\u003c\/form\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"div2\" style=\"display: block;\" data-mce-style=\"display: block;\"\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cdiv class=\"desCon\"\u003e\n\u003cul\u003e\n\u003cli\u003eColour-coded Gravity 3-Pin interface, compatible with hundreds of plug\u0026amp;play electronic modules\u003c\/li\u003e\n\u003cli\u003e3-way analog input; 6-way digital input\/output (PWM); 3V\/5V jumper switch; 3.5mm audio jack\u003c\/li\u003e\n\u003cli\u003eExternal Micro USB power port, up to 5V 2A power output\u003c\/li\u003e\n\u003cli\u003eWell-designed component lay-out and silk-screen. Reversed connection protection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cdiv class=\"desCon\"\u003e\n\u003cul\u003e\n\u003cli\u003eInterface: 6 x Gravity 3Pin\u003c\/li\u003e\n\u003cli\u003eOperating Voltage: 5V\/3.3V\u003c\/li\u003e\n\u003cli\u003eInput Power: \u0026lt;10W\u003c\/li\u003e\n\u003cli\u003eMeasuring Range: 0-3.3V (Analog), 0-5V (Digital):\u003c\/li\u003e\n\u003cli\u003eDimension: 68.5 * 53.3mm\/ 2.7 * 2.1 inches\u003c\/li\u003e\n\u003cli\u003eWeight: 22.8g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli class=\"desCon\"\u003eProduct Wiki\u003c\/li\u003e\n\u003cli class=\"desCon\"\u003eMore Documents\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eShipping List\u003c\/h2\u003e\n\u003cdiv class=\"desCon\"\u003e\n\u003cul\u003e\n\u003cli\u003e1x Micro:Mate Gravity Expansion Board\u003c\/li\u003e\n\u003cli\u003e2x Brass nut M4 5 x 4\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003emicro:bit not included\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch2\u003e\u003c\/h2\u003e\n\u003c\/div\u003e","brand":"DFRobot","offers":[{"title":"Default Title","offer_id":48624189669594,"sku":"aeu1789686129966","price":4.22,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0824\/8318\/3834\/files\/micromate---mini-expansion-board-for-microbit-gravity-compatible_1.jpg?v=1789686138"},{"product_id":"view-graphics128-oled-display-128x64-for-bbc-microbit","title":":VIEW Graphics128 OLED Display 128x64 for BBC micro:bit","description":"\u003cp\u003eDisplay meaningful output from your micro:bit project with the Kitronik :VIEW Graphics128 OLED display!\u003c\/p\u003e\n\u003cp\u003eThe Kitronik :VIEW Graphics128 OLED display gives the user the ability to add a monochrome 128x64 display to the\u003cspan\u003e \u003c\/span\u003eBBC micro: bit (\u003cstrong\u003enot included\u003c\/strong\u003e). The onboard edge connector allows the micro:bit to slot into the board without any additional fixings. The board also features a micro:bit style I\/O connector which means it can be slotted into any other micro:bit accessory that has a slot for inserting a micro:bit. All of the pins from the BBC micro:bit are tracked through to provide the edge pads with the full usage of the BBC micro:bit, with the addition of a display. As the micro:bit slots directly into the board, no tools, fixings, or soldering are required.\u003c\/p\u003e\n\u003cp\u003eKitronik has generated custom blocks and example code for MakeCode and MicroPython (see the\u003cspan\u003e \u003c\/span\u003edatasheet\u003cspan\u003e \u003c\/span\u003efor more details). The blocks can be added via the add Extensions function in the editor by searching “Kitronik”, or from\u003cspan\u003e \u003c\/span\u003eGitHub. More information about our custom Python functions can also be found at\u003cspan\u003e \u003c\/span\u003eGitHub.\u003c\/p\u003e\n\u003cp\u003ePower to the board can be provided via the edge connector or from the micro:bit. The board requires a 3V supply and has no voltage protection on the board. The board features an LED to indicate when the board has power. With every display, pixel turned on the board has a maximum power draw of 40mA.\u003c\/p\u003e\n\u003cp\u003eThe 128x64 display uses the SSD1306 driver on an I2C interface. At the centre of the board are the breakout pads for the I2C lines, along with two ground pads and a 3V power pad. These pads are on a 2.54mm pitch, which means they will fit either wire or a pin header for jumper cables (not provided). This can be used by those who wish to add more I2C devices and functionality. It is possible to change the default I2C address of the board (see the Selecting Display section of this Datasheet for more details).\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAdd a monochrome 128x64 OLED display to the micro:bit\u003c\/li\u003e\n\u003cli\u003eThe micro:bit slots into the onboard edge connector\u003c\/li\u003e\n\u003cli\u003eThe board features a micro:bit style I\/O connector allowing it to be slotted into other\u003cspan\u003e \u003c\/span\u003emicro:bit accessories\n\u003c\/li\u003e\n\u003cli\u003eIt can be coded with MakeCode blocks and with Python\u003c\/li\u003e\n\u003cli\u003eKitronik has created custom MakeCode blocks\u003c\/li\u003e\n\u003cli\u003eKitronik has created a GitHub repo for custom Python functions\u003c\/li\u003e\n\u003cli\u003eIt can be powered via the edge connector or by the micro:bit\u003c\/li\u003e\n\u003cli\u003eRequires a 3V supply\u003c\/li\u003e\n\u003cli\u003eThe board features a power indicator LED\u003c\/li\u003e\n\u003cli\u003eIt is possible to change the default I2C address of the board\u003c\/li\u003e\n\u003cli\u003eNo tools, fixings, or soldering are required\u003c\/li\u003e\n\u003cli\u003eLength: 58mm\/Width: 52mm\/Height: 11.8mm\u003c\/li\u003e\n\u003cli\u003ePCB Thickness: 1.6mm.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Kitronik :VIEW Graphics128 OLED display 128x64 for BBC micro:bit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eRequires\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBBC micro:bit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e128x64 Display -\u003cspan\u003e \u003c\/span\u003eText and Line Drawing Tutorial\n\u003c\/li\u003e\n\u003cli\u003e128x64 Display -\u003cspan\u003e \u003c\/span\u003ePlotting Graphs Tutorial\n\u003c\/li\u003e\n\u003cli\u003eDatasheet\u003c\/li\u003e\n\u003cli\u003eGitHub page for custom\u003cspan\u003e \u003c\/span\u003eMakeCode blocks\n\u003c\/li\u003e\n\u003cli\u003eGitHub page for custom\u003cspan\u003e \u003c\/span\u003ePython functions\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"Kitronik","offers":[{"title":"Default Title","offer_id":48624226566362,"sku":"saa1789687188816","price":13.06,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0824\/8318\/3834\/files\/view-graphics128-oled-display-128x64-for-bbc-microbit_1.jpg?v=1789687193"},{"product_id":"air-quality-and-environmental-board-for-microbit","title":"Air Quality and Environmental Board for micro:bit","description":"\u003cp\u003eThe Kitronik Air Quality Board provides a complete air monitoring and reporting solution for the BBC micro:bit. The wealth of onboard sensors and connection points allow you to collect extensive air quality data that can be stored in onboard memory and displayed on the OLED screen or transferred to a computer for analysis. Kitronik has also produced online MakeCode tutorials that are designed to introduce you to all of the key features of the board, see the 'Resources section below for links.\u003c\/p\u003e\n\u003cp\u003eThe Air Quality Board is perfect for the classroom. Run short or long-term classroom experiments, such as; monitoring air quality throughout the year, with and without the heating on. You can then use the collected data to produce graphs and more. Alternatively, it would make a great addition to an office\/workshop, let science inform you when it's time to open those windows or remind you to ventilate your work area!\u003c\/p\u003e\n\u003cp\u003eThe board includes an integrated Edge Connector for your BBC micro:bit to easily slot into. The onboard sensors allow readings for temperature, pressure, humidity, air quality index, and eCO2. The real-time clock (RTC) and 1Mbit of onboard EEPROM memory enable timestamped data logging and long term data storage. There are also 3 status ZIP LEDs onboard which be used for visually displaying data. 3 of the BBC micro:bit's pins (Pins 0,1, and 2) are broken out to 0.1” pitch solder pads allowing for additional sensors or outputs. There are also 3V and GND pads for providing power to these devices.\u003c\/p\u003e\n\u003cp\u003eThe board can be powered via either the 3xAA battery holder or the micro USB connector. The voltage supply is controlled using a power switch, with a green status LED to indicate when the board is turned on. The board also produces a regulated 3V supply which is fed into the edge connector to power the inserted BBC micro:bit, removing the need to power the BBC micro:bit separately.\u003c\/p\u003e\n\u003cp\u003eThe board also features a connection point for a solar cell that can be used alongside rechargeable batteries to keep your experiments running for longer.\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eNOTE\u003c\/strong\u003e: Please ensure the correct rechargeable batteries are fitted before charging, they should be NiMh.\u003c\/p\u003e\n\u003cp\u003eKitronik has produced custom MakeCode blocks to make the task of coding as straightforward as possible. You can add our custom blocks to the MakeCode editor by clicking on the cog icon in the top right of the editor and selecting Extensions. You can then type and enter Kitronik into the search bar and then click on the tile for the Air Quality Board blocks. The custom blocks will now be added to the editor's blocks menu. These blocks can also be added to the menu via this URL;\u003cspan\u003e \u003c\/span\u003ehttps:\/\/github.com\/KitronikLtd\/pxt-kitronik-air-quality\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAn all in one Air Quality monitoring and reporting solution for the BBC micro:bit\u003c\/li\u003e\n\u003cli\u003eMeasure temperature, pressure, humidity, air quality index, and eCO2\u003c\/li\u003e\n\u003cli\u003ePins 0, 1 and 2 are broken out to solder pads for additional I\/O\u003c\/li\u003e\n\u003cli\u003eThe board features a black and white 128x64 OLED display screen and 3 status ZIP LEDs for visually displaying data\u003c\/li\u003e\n\u003cli\u003eThe real-time clock (RTC) and 1Mbit of onboard EEPROM memory enable timestamped data logging and long term data storage\u003c\/li\u003e\n\u003cli\u003eOnline MakeCode tutorials that introduce you to all of the boards key features\u003c\/li\u003e\n\u003cli\u003eRun long term monitoring experiments in the classroom throughout the school year\u003c\/li\u003e\n\u003cli\u003eThere is an integrated edge connector for the micro:bit to slot into\u003c\/li\u003e\n\u003cli\u003eThe board also features a connection point for a solar cell that can be used alongside rechargeable batteries to keep your experiments running for longer\u003c\/li\u003e\n\u003cli\u003eKitronik has produced custom MakeCode blocks for convenient and straightforward coding\u003c\/li\u003e\n\u003cli\u003eIt can be coded with MakeCode\/Javascript\/Python\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eContents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Kitronik Air Quality Board for BBC micro:bit\u003c\/li\u003e\n\u003cli\u003e1 x 3xAA battery holder\u003c\/li\u003e\n\u003cli\u003e1 x USB Lead\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003emicro:bit not included\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eDimensions\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eLength: 68.5mm\u003c\/li\u003e\n\u003cli\u003eWidth: 48mm\u003c\/li\u003e\n\u003cli\u003eHeight: 28.5mm\u003c\/li\u003e\n\u003cli\u003ePCB Thickness: 1.6mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDatasheet\u003c\/li\u003e\n\u003cli\u003eOnline MakeCode Tutorials:\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eRead temperature, pressure, and humidity\u003c\/li\u003e\n\u003cli\u003eUsing the OLED display\u003c\/li\u003e\n\u003cli\u003eSet and display date and time\u003c\/li\u003e\n\u003cli\u003eData logging and data transfer\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e","brand":"Kitronik","offers":[{"title":"Default Title","offer_id":48624261005530,"sku":"tfp1789688180474","price":43.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0824\/8318\/3834\/files\/air-quality-and-environmental-board-for-microbit_1.jpg?v=1789688186"},{"product_id":"sparkfun-qwiic-microbit-breakout-with-headers","title":"SparkFun Qwiic micro:bit Breakout (with Headers)","description":"\u003cp\u003eThe SparkFun Qwiic micro:bit Breakout is a board that connects to the BBC micro:bit and expands the capabilities of the development platform by providing access to more pins and allowing for connections to the I\u003csup\u003e2\u003c\/sup\u003eC and SPI buses. We've already attached headers to this version of the board so you don't need to worry about any soldering! This breakout board for the micro:bit’s edge connector allows intermediate and advanced users to connect the micro:bit to breadboards and other Qwiic sensors, motors, LEDs and more!\u003c\/p\u003e\n\u003cp\u003eThe micro:bit on its own has three digital\/analogue input\/output rings available for you to use initially with alligator clips. With the micro:bit breakout we have broken out all 21 GPIO pins to male headers, power and ground to a pre-soldered 0.1\" header and with two individual Qwiic Connectors. With this breakout you will be able to unlock the full potential of your micro:bit!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote\u003c\/strong\u003e: micro:bit not included\u003c\/p\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSchematic\u003c\/li\u003e\n\u003cli\u003eEagle Files\u003c\/li\u003e\n\u003cli\u003eHookup Guide\u003c\/li\u003e\n\u003cli\u003emicro:bit Guide\u003c\/li\u003e\n\u003cli\u003eMicrosoft MakeCode\u003c\/li\u003e\n\u003cli\u003eMicroPython for micro:bit Editor\u003c\/li\u003e\n\u003cli\u003eGitHub Hardware Repo\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sparkfun","offers":[{"title":"Default Title","offer_id":48624264085722,"sku":"hms1789688223472","price":5.26,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0824\/8318\/3834\/files\/sparkfun-qwiic-microbit-breakout-with-headers_1.jpg?v=1789688229"}],"url":"https:\/\/memoryfoamwear.shop\/collections\/bbc-microbit-add-ons-and-extensions.oembed","provider":"My Store","version":"1.0","type":"link"}